Sudden Issue with add for lymphGate in flowCore
1
0
Entering edit mode
Aric Gregson ▴ 270
@aric-gregson-3058
Last seen 9.6 years ago
Hello, I have an odd issue that I have been unable thus far to resolve. Literally overnight it has become impossible to add a lymphGate filter to a workFlow. This is specific for the lymphGate filter only, as any other type of filter works just fine. The error that I am receiving is shown after the Sweave output here. It happens regardless of whether the code is run in Sweave or manually in R. [snip] 10 : echo keep.source term verbatim (label = createWorkFlowBoundaryTransformLogicle) 11 : echo keep.source term verbatim (label = LiveDeadUVFilterAlt) 12 : keep.source term tex (label = summaryLive) 13 : echo keep.source term verbatim pdf (label = plotLiveDead) 14 : keep.source (label = LiveDeadUVFiltercd3) 15 : keep.source (label = plotLiveDeadcd3) 16 : echo keep.source term verbatim (label = singletfilterCreate) 17 : echo keep.source term verbatim pdf (label = plotSingletfilter) 18 : echo keep.source term verbatim (label = lymphocyteFilterCD4CD3) 19 : echo keep.source term verbatim (label = add.lymph.Gate) Error: chunk 19 (label = add.lymph.Gate) Error in function (classes, fdef, mtable) : unable to find an inherited method for function "add", for signature "workFlow", "list" In addition: Warning messages: 1: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 2: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 3: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 4: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 5: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 6: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 7: In readBin(con, dattype, n = (offsets["dataend"] - offsets["datastart"] + : 'signed = FALSE' is only valid for integers of sizes 1 and 2 The only difference overnight is that I 'upgraded' the tcl/tk package on my computer. Since then I have reinstalled R and ran upgrade.packages for both R and Bioconductor, but the problem persists. I suspect I have not provided enough information here. Any ideas on how to figure this out would be greatly appreciated. Thanks, Aric ----------------- sessionInfo() R version 2.13.2 (2011-09-30) Platform: amd64-portbld-freebsd9.0 (64-bit) locale: [1] C attached base packages: [1] splines tools grid stats graphics grDevices utils [8] datasets methods base other attached packages: [1] xtable_1.6-0 Rgraphviz_1.30.1 flowQ_1.12.0 [4] latticeExtra_0.6-19 RColorBrewer_1.0-5 parody_1.10.0 [7] bioDist_1.24.1 KernSmooth_2.23-7 outliers_0.14 [10] flowStats_1.13.0 cluster_1.14.1 mvoutlier_1.9.4 [13] robCompositions_1.5.0 car_2.0-11 survival_2.36-10 [16] nnet_7.3-1 compositions_1.10-2 energy_1.4-0 [19] MASS_7.3-14 boot_1.3-2 tensorA_0.36 [22] rgl_0.92.798 fda_2.2.7 zoo_1.7-6 [25] flowWorkspace_0.99.22 IDPmisc_1.1.16 flowViz_1.16.0 [28] lattice_0.19-33 flowCore_1.18.0 rrcov_1.3-01 [31] pcaPP_1.9-44 mvtnorm_0.9-9991 robustbase_0.7-8 [34] Biobase_2.12.2 XML_3.4-3 RBGL_1.29.0 [37] graph_1.30.0 multicore_0.1-7 Rmpi_0.5-9 [40] fortunes_1.4-2 loaded via a namespace (and not attached): [1] AnnotationDbi_1.14.1 DBI_0.2-5 RSQLite_0.10.0 [4] annotate_1.30.1 feature_1.2.8 geneplotter_1.30.0 [7] ks_1.8.4 stats4_2.13.2
• 866 views
ADD COMMENT
0
Entering edit mode
@martin-morgan-1513
Last seen 6 weeks ago
United States
On 11/13/2011 12:08 PM, Aric Gregson wrote: > Hello, > > I have an odd issue that I have been unable thus far to resolve. > Literally overnight it has become impossible to add a lymphGate filter > to a workFlow. This is specific for the lymphGate filter only, as any > other type of filter works just fine. The error that I am receiving is > shown after the Sweave output here. It happens regardless of whether > the code is run in Sweave or manually in R. > > [snip] > 10 : echo keep.source term verbatim (label = > createWorkFlowBoundaryTransformLogicle) > 11 : echo keep.source term verbatim (label = LiveDeadUVFilterAlt) > 12 : keep.source term tex (label = summaryLive) > 13 : echo keep.source term verbatim pdf (label = plotLiveDead) > 14 : keep.source (label = LiveDeadUVFiltercd3) > 15 : keep.source (label = plotLiveDeadcd3) > 16 : echo keep.source term verbatim (label = singletfilterCreate) > 17 : echo keep.source term verbatim pdf (label = plotSingletfilter) > 18 : echo keep.source term verbatim (label = lymphocyteFilterCD4CD3) > 19 : echo keep.source term verbatim (label = add.lymph.Gate) > > Error: chunk 19 (label = add.lymph.Gate) > Error in function (classes, fdef, mtable) : > unable to find an inherited method for function "add", for signature > "workFlow", "list" > In addition: Warning messages: > 1: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > 2: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > 3: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > 4: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > 5: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > 6: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > 7: In readBin(con, dattype, n = (offsets["dataend"] - > offsets["datastart"] + : > 'signed = FALSE' is only valid for integers of sizes 1 and 2 > > > The only difference overnight is that I 'upgraded' the tcl/tk package > on my computer. Since then I have reinstalled R and ran > upgrade.packages for both R and Bioconductor, but the problem persists. > I suspect I have not provided enough information here. Any ideas on how > to figure this out would be greatly appreciated. Hi Aric -- instead of running 'Sweave' on your vignette, trying running 'Stangle'. This produces an R script file that you can step through. Likely you'll get to the code corresponding to chunk 19, and see the error. Likely you can narrow this down to a single function call that causes the problem and, with luck, identify a parameter to a call to add() (probably the second parameter) that is a 'list' rather than what it is supposed to be. But at that point you might be able to give us a simple-to-reproduce example. Martin > > Thanks, Aric > ----------------- > > sessionInfo() > R version 2.13.2 (2011-09-30) > Platform: amd64-portbld-freebsd9.0 (64-bit) > > locale: > [1] C > > attached base packages: > [1] splines tools grid stats graphics grDevices > utils > [8] datasets methods base > > other attached packages: > [1] xtable_1.6-0 Rgraphviz_1.30.1 flowQ_1.12.0 > [4] latticeExtra_0.6-19 RColorBrewer_1.0-5 parody_1.10.0 > [7] bioDist_1.24.1 KernSmooth_2.23-7 outliers_0.14 > [10] flowStats_1.13.0 cluster_1.14.1 mvoutlier_1.9.4 > [13] robCompositions_1.5.0 car_2.0-11 survival_2.36-10 > [16] nnet_7.3-1 compositions_1.10-2 energy_1.4-0 > [19] MASS_7.3-14 boot_1.3-2 tensorA_0.36 > [22] rgl_0.92.798 fda_2.2.7 zoo_1.7-6 > [25] flowWorkspace_0.99.22 IDPmisc_1.1.16 flowViz_1.16.0 > [28] lattice_0.19-33 flowCore_1.18.0 rrcov_1.3-01 > [31] pcaPP_1.9-44 mvtnorm_0.9-9991 robustbase_0.7-8 > [34] Biobase_2.12.2 XML_3.4-3 RBGL_1.29.0 > [37] graph_1.30.0 multicore_0.1-7 Rmpi_0.5-9 > [40] fortunes_1.4-2 > > loaded via a namespace (and not attached): > [1] AnnotationDbi_1.14.1 DBI_0.2-5 RSQLite_0.10.0 > [4] annotate_1.30.1 feature_1.2.8 geneplotter_1.30.0 > [7] ks_1.8.4 stats4_2.13.2 > > _______________________________________________ > Bioconductor mailing list > Bioconductor at r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor -- Computational Biology Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N. PO Box 19024 Seattle, WA 98109 Location: M1-B861 Telephone: 206 667-2793
ADD COMMENT
0
Entering edit mode
Hello, I am wondering which packages I should use to annotate the enrichment of my sequence short list in bed format like chr10,23131,32323. I want to know the percentage/faction of exon, intergenic, so on. Thanks in advance for your suggestions and help. Best, John [[alternative HTML version deleted]]
ADD REPLY

Login before adding your answer.

Traffic: 734 users visited in the last hour
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6