'citation("RBGL")' command produces package not found error
2
0
Entering edit mode
@jeremiah-willcock-5302
Last seen 9.6 years ago
I am not an expert user of R, and I am looking to get the citation for the RBGL package. I am using R 2.15.0, and I entered the two commands on http://bioc.ism.ac.jp/2.8/bioc/html/RBGL.html to install RBGL. I was not running as root, so R created a subdirectory under my home directory for the installation. RBGL appeared to install successfully, but when I try to get the citation, I get: > citation("RBGL") Error in citation("RBGL") : package ?RBGL? not found Trying to run 'library(RBGL)' (the first non-comment line in the demo file at http://bioc.ism.ac.jp/2.8/bioc/vignettes/RBGL/inst/doc/RBGL.R) produces: > library(RBGL) Error in library(RBGL) : there is no package called ?RBGL? What steps should I take to make sure the package is installed correctly? Could someone please send me (or post) the citation, without needing to install the package to access it? Thank you. -- Jeremiah Willcock
RBGL RBGL • 2.0k views
ADD COMMENT
0
Entering edit mode
Dan Tenenbaum ★ 8.2k
@dan-tenenbaum-4256
Last seen 3.2 years ago
United States
Hi Jeremiah, On Thu, May 24, 2012 at 10:13 AM, Jeremiah Willcock <jewillco at="" osl.iu.edu=""> wrote: > I am not an expert user of R, and I am looking to get the citation for the > RBGL package. ?I am using R 2.15.0, If you are using R 2.15 you should be using Bioconductor 2.10, and therefore looking at this page: http://bioconductor.org/packages/2.10/bioc/html/RBGL.html and I entered the two commands on > http://bioc.ism.ac.jp/2.8/bioc/html/RBGL.html to install RBGL. ?I was not > running as root, so R created a subdirectory under my home directory for the > installation. ?RBGL appeared to install successfully, but when I try to get > the citation, I get: > >> citation("RBGL") > > Error in citation("RBGL") : package ?RBGL? not found > > Trying to run 'library(RBGL)' (the first non-comment line in the demo file > at http://bioc.ism.ac.jp/2.8/bioc/vignettes/RBGL/inst/doc/RBGL.R) produces: > >> library(RBGL) > > Error in library(RBGL) : there is no package called ?RBGL? > > What steps should I take to make sure the package is installed correctly? What was the output of: source("http://bioconductor.org/biocLite.R") biocLite("RBGL") Also, what is the output of sessionInfo() ? > Could someone please send me (or post) the citation, without needing to > install the package to access it? ?Thank you. > citation("RBGL") To cite package ?RBGL? in publications use: Vince Carey, Li Long and R. Gentleman (). RBGL: An interface to the BOOST graph library. R package version 1.31.1. http://www.bioconductor.org A BibTeX entry for LaTeX users is @Manual{, title = {RBGL: An interface to the BOOST graph library}, author = {Vince Carey and Li Long and R. Gentleman}, note = {R package version 1.31.1}, url = {http://www.bioconductor.org}, } ATTENTION: This citation information has been auto-generated from the package DESCRIPTION file and may need manual editing, see ?help("citation")? . Warning message: In citation("RBGL") : no date field in DESCRIPTION file of package ?RBGL? Dan > > -- Jeremiah Willcock > _______________________________________________ > Bioconductor mailing list > Bioconductor at r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor
ADD COMMENT
0
Entering edit mode
On Thu, 24 May 2012, Dan Tenenbaum wrote: > Hi Jeremiah, > > On Thu, May 24, 2012 at 10:13 AM, Jeremiah Willcock <jewillco at="" osl.iu.edu=""> wrote: >> I am not an expert user of R, and I am looking to get the citation for the >> RBGL package. ?I am using R 2.15.0, > > If you are using R 2.15 you should be using Bioconductor 2.10, and > therefore looking at this page: > > http://bioconductor.org/packages/2.10/bioc/html/RBGL.html I switched to that later; the install directions and first part of the demo file are the same, though. > and I entered the two commands on >> http://bioc.ism.ac.jp/2.8/bioc/html/RBGL.html to install RBGL. ?I was not >> running as root, so R created a subdirectory under my home directory for the >> installation. ?RBGL appeared to install successfully, but when I try to get >> the citation, I get: >> >>> citation("RBGL") >> >> Error in citation("RBGL") : package ?RBGL? not found >> >> Trying to run 'library(RBGL)' (the first non-comment line in the demo file >> at http://bioc.ism.ac.jp/2.8/bioc/vignettes/RBGL/inst/doc/RBGL.R) produces: >> >>> library(RBGL) >> >> Error in library(RBGL) : there is no package called ?RBGL? >> >> What steps should I take to make sure the package is installed correctly? > > > What was the output of: > > source("http://bioconductor.org/biocLite.R") > biocLite("RBGL") I should have checked that more carefully -- it failed to compile (with g++ 4.7.0). Here's the last part of the error message: In file included from boostIncl/boost/graph/detail/adjacency_list.hpp:30:0, from boostIncl/boost/graph/adjacency_list.hpp:313, from RBGL.hpp:26, from transitive_closure.cpp:16: boostIncl/boost/graph/graph_concepts.hpp: In instantiation of ?boost::concepts::IncidenceGraph::~IncidenceGraph() [with G = std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > >]?: boostIncl/boost/graph/graph_concepts.hpp:70:1: required from ?static void boost::concept::requirement<model>::failed() [with Model = boost::concepts::IncidenceGraphConcept<std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > > >]? boostIncl/boost/concept_check.hpp:43:1: required from ?void boost::function_requires(Model*) [with Model = boost::concepts::IncidenceGraphConcept<std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > > >]? boostIncl/boost/graph/depth_first_search.hpp:84:7: required from ?void boost::detail::depth_first_visit_impl(const IncidenceGraph&, typename boost::graph_traits<graph>::vertex_descriptor, DFSVisitor&, ColorMap, TerminatorFunc) [with IncidenceGraph = std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > >; DFSVisitor = boost::topo_sort_visitor<std::back_insert_iterator<std::vector<long unsigned="" int=""> > >; ColorMap = boost::iterator_property_map<__gnu_cxx:: __normal_iterator<boost::default_color_type*, std::vector<boost::default_color_type=""> >, boost::identity_property_map, boost::default_color_type, boost::default_color_type&>; TerminatorFunc = boost::detail::nontruth2; typename boost::graph_traits<graph>::vertex_descriptor = long unsigned int]? boostIncl/boost/graph/depth_first_search.hpp:201:7: required from ?void boost::depth_first_search(const VertexListGraph&, DFSVisitor, ColorMap, typename boost::graph_traits<graph>::vertex_descriptor) [with VertexListGraph = std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > >; DFSVisitor = boost::topo_sort_visitor<std::back_insert_iterator<std::vector<long unsigned="" int=""> > >; ColorMap = boost::iterator_property_map<__gnu_cxx:: __normal_iterator<boost::default_color_type*, std::vector<boost::default_color_type=""> >, boost::identity_property_map, boost::default_color_type, boost::default_color_type&>; typename boost::graph_traits<graph>::vertex_descriptor = long unsigned int]? boostIncl/boost/graph/depth_first_search.hpp:249:9: required from ?static void boost::detail::dfs_dispatch<boost::detail::error_property _not_found="">::apply(const VertexListGraph&, DFSVisitor, Vertex, const boost::bgl_named_params<p, t,="" r="">&, boost::detail::error_property_not_found) [with VertexListGraph = std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > >; Vertex = long unsigned int; DFSVisitor = boost::topo_sort_visitor<std::back_insert_iterator<std::vector<long unsigned="" int=""> > >; P = boost::topo_sort_visitor<std::back_insert_iterator<std::vector<long unsigned="" int=""> > >; T = boost::graph_visitor_t; R = boost::bgl_named_params<boost::identity_property_map, boost::vertex_index_t,="" boost::no_property="">]? boostIncl/boost/graph/depth_first_search.hpp:329:5: required from ?void boost::depth_first_search(const VertexListGraph&, const boost::bgl_named_params<p, t,="" r="">&) [with VertexListGraph = std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > >; P = boost::topo_sort_visitor<std::back_insert_iterator<std::vector<long unsigned="" int=""> > >; T = boost::graph_visitor_t; R = boost::bgl_named_params<boost::identity_property_map, boost::vertex_index_t,="" boost::no_property="">]? boostIncl/boost/graph/topological_sort.hpp:64:5: required from ?void boost::topological_sort(VertexListGraph&, OutputIterator, const boost::bgl_named_params<p, t,="" r="">&) [with VertexListGraph = std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<long unsigned="" int=""> > >; OutputIterator = std::back_insert_iterator<std::vector<long unsigned="" int=""> >; P = boost::identity_property_map; T = boost::vertex_index_t; R = boost::no_property]? boostIncl/boost/graph/transitive_closure.hpp:120:5: required from ?void boost::transitive_closure(const Graph&, GraphTC&, G_to_TC_VertexMap, VertexIndexMap) [with Graph = R_adjacency_list<boost::directeds, double="">; GraphTC = R_adjacency_list<boost::directeds, double="">; G_to_TC_VertexMap = boost::iterator_property_map<long unsigned="" int*,="" boost::vec_adj_list_v="" ertex_id_map<boost::property<boost::vertex_color_t,="" boost::default_color_type="">, long unsigned int>, long unsigned int, long unsigned int&>; VertexIndexMap = boost::vec_adj_list_vertex_id_ma p<boost::property<boost::vertex_color_t, boost::default_color_type="">, long unsigned int>]? boostIncl/boost/graph/transitive_closure.hpp:263:5: required from ?void boost::transitive_closure(const Graph&, GraphTC&) [with Graph = R_adjacency_list<boost::directeds, double="">; GraphTC = R_adjacency_list<boost::directeds, double="">]? transitive_closure.cpp:29:30: required from here boostIncl/boost/graph/graph_concepts.hpp:88:11: error: ?out_edges? was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] In file included from boostIncl/boost/graph/transpose_graph.hpp:16:0, from boostIncl/boost/graph/strong_components.hpp:258, from boostIncl/boost/graph/transitive_closure.hpp:18, from transitive_closure.cpp:17: boostIncl/boost/graph/reverse_graph.hpp:151:1: note: ?template<class bidirectionalgraph,="" class="" gref=""> std::pair<typename boost::graph_traits<graph="">::in_edge_iterator, typename boost::graph_traits<graph>::in_edge_iterator> boost::out_edges(typename boost::graph_traits<graph>::vertex_descriptor, const boost::reverse_graph<graph, graphref="">&)? declared here, later in the translation unit In file included from boostIncl/boost/graph/detail/adjacency_list.hpp:30:0, from boostIncl/boost/graph/adjacency_list.hpp:313, from RBGL.hpp:26, from transitive_closure.cpp:16: boostIncl/boost/graph/graph_concepts.hpp:89:11: error: ?out_degree? was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] In file included from boostIncl/boost/graph/transpose_graph.hpp:16:0, from boostIncl/boost/graph/strong_components.hpp:258, from boostIncl/boost/graph/transitive_closure.hpp:18, from transitive_closure.cpp:17: boostIncl/boost/graph/reverse_graph.hpp:173:1: note: ?template<class bidirectionalgraph,="" class="" gref=""> typename boost::graph_traits<graph>::degree_size_type boost::out_degree(typename boost::graph_traits<graph>::vertex_descriptor, const boost::reverse_graph<graph, graphref="">&)? declared here, later in the translation unit make: *** [transitive_closure.o] Error 1 ERROR: compilation failed for package ?RBGL? * removing ?/nfs/deep-thought/home/users/jewillco/R/x86_64-redhat- linux-gnu-library/2.15/RBGL? The downloaded source packages are in ?/tmp/Rtmp28G8jD/downloaded_packages? Warning messages: 1: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) : installation of package ?RBGL? had non-zero exit status 2: installed directory not writable, cannot update packages 'foreign', 'MASS', 'mgcv', 'msm', 'mvtnorm', 'nlme', 'RODBC', 'survival', 'zoo', 'car', 'multcomp', 'systemfit' I think a lot of the warnings are from using an old version of BGL; newer ones have many bug fixes applied and warnings resolved. > Also, what is the output of > sessionInfo() > ? R version 2.15.0 (2012-03-30) Platform: x86_64-redhat-linux-gnu (64-bit) locale: [1] LC_CTYPE=en_US.utf8 LC_NUMERIC=C [3] LC_TIME=en_US.utf8 LC_COLLATE=en_US.utf8 [5] LC_MONETARY=en_US.utf8 LC_MESSAGES=en_US.utf8 [7] LC_PAPER=C LC_NAME=C [9] LC_ADDRESS=C LC_TELEPHONE=C [11] LC_MEASUREMENT=en_US.utf8 LC_IDENTIFICATION=C attached base packages: [1] stats graphics grDevices utils datasets methods base > > >> Could someone please send me (or post) the citation, without needing to >> install the package to access it? ?Thank you. > >> citation("RBGL") > > To cite package ?RBGL? in publications use: > > Vince Carey, Li Long and R. Gentleman (). RBGL: An interface to the > BOOST graph library. R package version 1.31.1. > http://www.bioconductor.org > > A BibTeX entry for LaTeX users is > > @Manual{, > title = {RBGL: An interface to the BOOST graph library}, > author = {Vince Carey and Li Long and R. Gentleman}, > note = {R package version 1.31.1}, > url = {http://www.bioconductor.org}, > } > > ATTENTION: This citation information has been auto-generated from the > package DESCRIPTION file and may need manual editing, see > ?help("citation")? . > > Warning message: > In citation("RBGL") : no date field in DESCRIPTION file of package ?RBGL? Thank you very much for that. -- Jeremiah Willcock
ADD REPLY
0
Entering edit mode
OK, so it was not a successful install. There are two concerns. First, Jeremiah notes that the BGL sources are not current. Second, he uses g++ 4.7.0. For general edification I will post some notes I made when another person noted difficulties with g++ 4.7.0. Clearly I want to use current boost if possible. --- start notes I can get a clean install of RBGL against Boost 1.49 with very minor changes to our source, if I sacrifice layout.cpp and incrConnComp.cpp in src. There are nontrivial API changes that I think will require a few hours to sort out to get these back in. I wonder if we _need_ layouts from RBGL. This is all based on gcc 4.1.2 -- I may be able to look at this under 4.4 also. But I strongly doubt that I will get a gcc 4.7 going any time soon. --- end notes So my view is that there is not much difficulty in adopting the current boost graph sources with a not-so-bleeding edge g++ (we build with 4.5 I believe). I can't comment on whether we can get to more current BGL with 4.7 as I don't have access. In any case I don't think our central support will use g++ 4.7 for at least a little while, so I would ask whether you could make suitable use of RBGL with a more mature g++. I will put some time into updating the boost sources for the devel branch RBGL. We also need to discuss the prospects of federated use of boost headers as they occur copied in several different bioc packages at this time. On Thu, May 24, 2012 at 1:24 PM, Jeremiah Willcock <jewillco@osl.iu.edu>wrote: > On Thu, 24 May 2012, Dan Tenenbaum wrote: > > Hi Jeremiah, >> >> On Thu, May 24, 2012 at 10:13 AM, Jeremiah Willcock <jewillco@osl.iu.edu> >> wrote: >> >>> I am not an expert user of R, and I am looking to get the citation for >>> the >>> RBGL package. I am using R 2.15.0, >>> >> >> If you are using R 2.15 you should be using Bioconductor 2.10, and >> therefore looking at this page: >> >> http://bioconductor.org/**packages/2.10/bioc/html/RBGL.**html<http: bioconductor.org="" packages="" 2.10="" bioc="" html="" rbgl.html=""> >> > > I switched to that later; the install directions and first part of the > demo file are the same, though. > > > and I entered the two commands on >> >>> http://bioc.ism.ac.jp/2.8/**bioc/html/RBGL.html<http: bioc.ism.ac="" .jp="" 2.8="" bioc="" html="" rbgl.html="">to install RBGL. I was not >>> running as root, so R created a subdirectory under my home directory for >>> the >>> installation. RBGL appeared to install successfully, but when I try to >>> get >>> the citation, I get: >>> >>> citation("RBGL") >>>> >>> >>> Error in citation("RBGL") : package ‘RBGL’ not found >>> >>> Trying to run 'library(RBGL)' (the first non-comment line in the demo >>> file >>> at http://bioc.ism.ac.jp/2.8/**bioc/vignettes/RBGL/inst/doc/**RBGL .R<http: bioc.ism.ac.jp="" 2.8="" bioc="" vignettes="" rbgl="" inst="" doc="" rbgl.r="">) >>> produces: >>> >>> library(RBGL) >>>> >>> >>> Error in library(RBGL) : there is no package called ‘RBGL’ >>> >>> What steps should I take to make sure the package is installed correctly? >>> >> >> >> What was the output of: >> >> source("http://bioconductor.**org/biocLite.R<http: bioconductor.or="" g="" bioclite.r=""> >> ") >> biocLite("RBGL") >> > > I should have checked that more carefully -- it failed to compile (with > g++ 4.7.0). Here's the last part of the error message: > > In file included from boostIncl/boost/graph/detail/** > adjacency_list.hpp:30:0, > from boostIncl/boost/graph/**adjacency_list.hpp:313, > from RBGL.hpp:26, > from transitive_closure.cpp:16: > boostIncl/boost/graph/graph_**concepts.hpp: In instantiation of > ‘boost::concepts::**IncidenceGraph::~**IncidenceGraph() [with G = > std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<**long> unsigned int> > >]’: boostIncl/boost/graph/graph_**concepts.hpp:70:1: > required from ‘static void boost::concept::requirement<**Model>::failed() > [with Model = boost::concepts::**IncidenceGraphConcept<std::**vector <std::vector<long=""> unsigned int>, std::allocator<std::vector<**long unsigned="" int=""> > > >]’ > boostIncl/boost/concept_check.**hpp:43:1: required from ‘void > boost::function_requires(**Model*) [with Model = boost::concepts::** > IncidenceGraphConcept<std::**vector<std::vector<long unsigned="" int="">, > std::allocator<std::vector<**long unsigned="" int=""> > > >]’ > boostIncl/boost/graph/depth_**first_search.hpp:84:7: required from > ‘void boost::detail::depth_first_**visit_impl(const IncidenceGraph&, > typename boost::graph_traits<graph>::**vertex_descriptor, DFSVisitor&, > ColorMap, TerminatorFunc) [with IncidenceGraph = > std::vector<std::vector<long unsigned="" int="">, std::allocator<std::vector<**long> unsigned int> > >; DFSVisitor = boost::topo_sort_visitor<std::**> back_insert_iterator<std::**vector<long unsigned="" int=""> > >; ColorMap = > boost::iterator_property_map<_**_gnu_cxx::__normal_iterator<**boost: :default_color_type*, > std::vector<boost::default_**color_type> >, boost::identity_property_map, > boost::default_color_type, boost::default_color_type&>; TerminatorFunc = > boost::detail::nontruth2; typename boost::graph_traits<graph>::**vertex_descriptor > = long unsigned int]’ boostIncl/boost/graph/depth_**first_search.hpp:201:7: > required from ‘void boost::depth_first_search(**const VertexListGraph&, > DFSVisitor, ColorMap, typename boost::graph_traits<graph>::**vertex_descriptor) > [with VertexListGraph = std::vector<std::vector<long unsigned="" int="">, > std::allocator<std::vector<**long unsigned="" int=""> > >; DFSVisitor = > boost::topo_sort_visitor<std::**back_insert_iterator<std::**vector<l ong=""> unsigned int> > >; ColorMap = boost::iterator_property_map<_** > _gnu_cxx::__normal_iterator<**boost::default_color_type*, > std::vector<boost::default_**color_type> >, boost::identity_property_map, > boost::default_color_type, boost::default_color_type&>; typename > boost::graph_traits<graph>::**vertex_descriptor = long unsigned int]’ > boostIncl/boost/graph/depth_**first_search.hpp:249:9: required from > ‘static void boost::detail::dfs_dispatch<**boost::detail::error_property_* > *not_found>::apply(const VertexListGraph&, DFSVisitor, Vertex, const > boost::bgl_named_params<p, t,="" r="">&, boost::detail::error_property_**not_found) > [with VertexListGraph = std::vector<std::vector<long unsigned="" int="">, > std::allocator<std::vector<**long unsigned="" int=""> > >; Vertex = long > unsigned int; DFSVisitor = boost::topo_sort_visitor<std::**> back_insert_iterator<std::**vector<long unsigned="" int=""> > >; P = > boost::topo_sort_visitor<std::**back_insert_iterator<std::**vector<l ong=""> unsigned int> > >; T = boost::graph_visitor_t; R = > boost::bgl_named_params<boost:**:identity_property_map,> boost::vertex_index_t, boost::no_property>]’ boostIncl/boost/graph/depth_* > *first_search.hpp:329:5: required from ‘void boost::depth_first_search(* > *const VertexListGraph&, const boost::bgl_named_params<p, t,="" r="">&) [with > VertexListGraph = std::vector<std::vector<long unsigned="" int="">, > std::allocator<std::vector<**long unsigned="" int=""> > >; P = > boost::topo_sort_visitor<std::**back_insert_iterator<std::**vector<l ong=""> unsigned int> > >; T = boost::graph_visitor_t; R = > boost::bgl_named_params<boost:**:identity_property_map,> boost::vertex_index_t, boost::no_property>]’ boostIncl/boost/graph/**topological_sort.hpp:64:5: > required from ‘void boost::topological_sort(**VertexListGraph&, > OutputIterator, const boost::bgl_named_params<p, t,="" r="">&) [with > VertexListGraph = std::vector<std::vector<long unsigned="" int="">, > std::allocator<std::vector<**long unsigned="" int=""> > >; OutputIterator = > std::back_insert_iterator<std:**:vector<long unsigned="" int=""> >; P = > boost::identity_property_map; T = boost::vertex_index_t; R = > boost::no_property]’ boostIncl/boost/graph/**transitive_closure.hpp:120:5: > required from ‘void boost::transitive_closure(**const Graph&, GraphTC&, > G_to_TC_VertexMap, VertexIndexMap) [with Graph = R_adjacency_list<boost::*> *directedS, double>; GraphTC = R_adjacency_list<boost::**directeds,> double>; G_to_TC_VertexMap = boost::iterator_property_map<**long unsigned > int*, boost::vec_adj_list_vertex_id_**map<boost::property<boost::**v ertex_color_t,=""> boost::default_color_type>, long unsigned int>, long unsigned int, long > unsigned int&>; VertexIndexMap = boost::vec_adj_list_vertex_id_** > map<boost::property<boost::**vertex_color_t, boost::default_color_type="">, > long unsigned int>]’ boostIncl/boost/graph/**transitive_closure.hpp:263:5: > required from ‘void boost::transitive_closure(**const Graph&, GraphTC&) > [with Graph = R_adjacency_list<boost::**directeds, double="">; GraphTC = > R_adjacency_list<boost::**directeds, double="">]’ > transitive_closure.cpp:29:30: required from here > boostIncl/boost/graph/graph_**concepts.hpp:88:11: error: ‘out_edges’ was > not declared in this scope, and no declarations were found by > argument-dependent lookup at the point of instantiation [-fpermissive] In > file included from boostIncl/boost/graph/**transpose_graph.hpp:16:0, > from boostIncl/boost/graph/strong_**components.hpp:258, > from boostIncl/boost/graph/**transitive_closure.hpp:18, > from transitive_closure.cpp:17: > boostIncl/boost/graph/reverse_**graph.hpp:151:1: note: ‘template<class> BidirectionalGraph, class GRef> std::pair<typename> boost::graph_traits<graph>::**in_edge_iterator, typename > boost::graph_traits<graph>::**in_edge_iterator> boost::out_edges(typename > boost::graph_traits<graph>::**vertex_descriptor, const > boost::reverse_graph<graph, graphref="">&)’ declared here, later in the > translation unit In file included from boostIncl/boost/graph/detail/** > adjacency_list.hpp:30:0, > from boostIncl/boost/graph/**adjacency_list.hpp:313, > from RBGL.hpp:26, > from transitive_closure.cpp:16: > boostIncl/boost/graph/graph_**concepts.hpp:89:11: error: ‘out_degree’ was > not declared in this scope, and no declarations were found by > argument-dependent lookup at the point of instantiation [-fpermissive] In > file included from boostIncl/boost/graph/**transpose_graph.hpp:16:0, > from boostIncl/boost/graph/strong_**components.hpp:258, > from boostIncl/boost/graph/**transitive_closure.hpp:18, > from transitive_closure.cpp:17: > boostIncl/boost/graph/reverse_**graph.hpp:173:1: note: ‘template<class> BidirectionalGraph, class GRef> typename boost::graph_traits<graph>::**degree_size_type > boost::out_degree(typename boost::graph_traits<graph>::**vertex_descriptor, > const boost::reverse_graph<graph, graphref="">&)’ declared here, later in the > translation unit > make: *** [transitive_closure.o] Error 1 ERROR: compilation failed for > package ‘RBGL’ * removing ‘/nfs/deep-thought/home/users/** > jewillco/R/x86_64-redhat-**linux-gnu-library/2.15/RBGL’ > > The downloaded source packages are in > ‘/tmp/Rtmp28G8jD/downloaded_**packages’ > Warning messages: > 1: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) : > installation of package ‘RBGL’ had non-zero exit status > 2: installed directory not writable, cannot update packages 'foreign', > 'MASS', > 'mgcv', 'msm', 'mvtnorm', 'nlme', 'RODBC', 'survival', 'zoo', 'car', > 'multcomp', 'systemfit' > > I think a lot of the warnings are from using an old version of BGL; > newer ones have many bug fixes applied and warnings resolved. > > > Also, what is the output of >> sessionInfo() >> ? >> > > R version 2.15.0 (2012-03-30) > Platform: x86_64-redhat-linux-gnu (64-bit) > > locale: > [1] LC_CTYPE=en_US.utf8 LC_NUMERIC=C > [3] LC_TIME=en_US.utf8 LC_COLLATE=en_US.utf8 > [5] LC_MONETARY=en_US.utf8 LC_MESSAGES=en_US.utf8 > [7] LC_PAPER=C LC_NAME=C > [9] LC_ADDRESS=C LC_TELEPHONE=C > [11] LC_MEASUREMENT=en_US.utf8 LC_IDENTIFICATION=C > > attached base packages: > [1] stats graphics grDevices utils datasets methods base > > > >> >> Could someone please send me (or post) the citation, without needing to >>> install the package to access it? Thank you. >>> >> >> citation("RBGL") >>> >> >> To cite package ‘RBGL’ in publications use: >> >> Vince Carey, Li Long and R. Gentleman (). RBGL: An interface to the >> BOOST graph library. R package version 1.31.1. >> http://www.bioconductor.org >> >> A BibTeX entry for LaTeX users is >> >> @Manual{, >> title = {RBGL: An interface to the BOOST graph library}, >> author = {Vince Carey and Li Long and R. Gentleman}, >> note = {R package version 1.31.1}, >> url = {http://www.bioconductor.org}, >> } >> >> ATTENTION: This citation information has been auto-generated from the >> package DESCRIPTION file and may need manual editing, see >> ‘help("citation")’ . >> >> Warning message: >> In citation("RBGL") : no date field in DESCRIPTION file of package ‘RBGL’ >> > > Thank you very much for that. > > -- Jeremiah Willcock > _______________________________________________ > Bioconductor mailing list > Bioconductor@r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > [[alternative HTML version deleted]]
ADD REPLY
0
Entering edit mode
On Thu, 24 May 2012, Dan Tenenbaum wrote: (quoted text removed) If you can update the auto-generated citations, here's a cleaned-up BibTeX version: @Manual{rbgl, title = {{RBGL}: An Interface to the {B}oost {G}raph {L}ibrary}, author = {Vince Carey and Li Long and R. Gentleman}, note = {R package version 1.31.1}, url = {http://www.bioconductor.org}, } -- Jeremiah Willcock
ADD REPLY
0
Entering edit mode
@vincent-j-carey-jr-4
Last seen 6 weeks ago
United States
On Thu, May 24, 2012 at 1:13 PM, Jeremiah Willcock <jewillco@osl.iu.edu>wrote: > I am not an expert user of R, and I am looking to get the citation for the > RBGL package. I am using R 2.15.0, and I entered the two commands on > http://bioc.ism.ac.jp/2.8/**bioc/html/RBGL.html<http: bioc.ism.ac.j="" p="" 2.8="" bioc="" html="" rbgl.html="">to install RBGL. I was not running as root, so R created a subdirectory > under my home directory for the installation. RBGL appeared to install > successfully, but when I try to get the citation, I get: > > citation("RBGL") >> > Error in citation("RBGL") : package ‘RBGL’ not found > > Trying to run 'library(RBGL)' (the first non-comment line in the demo file > at http://bioc.ism.ac.jp/2.8/**bioc/vignettes/RBGL/inst/doc/**RBGL.R <http: bioc.ism.ac.jp="" 2.8="" bioc="" vignettes="" rbgl="" inst="" doc="" rbgl.r="">) > produces: > > library(RBGL) >> > Error in library(RBGL) : there is no package called ‘RBGL’ > > Please check the value of .libPaths() and make sure it includes the folder that you created and apparently used when installing. If that is not adequate, please send sessionInfo() and .libPaths() result and information on where you installed RBGL -- what you did in addition to biocInstall("RBGL"), which is _all_ that should be necessary, as R will take care of folder construction and .libPaths formulation. What steps should I take to make sure the package is installed correctly? > Could someone please send me (or post) the citation, without needing to > install the package to access it? Thank you. > > -- Jeremiah Willcock > _______________________________________________ > Bioconductor mailing list > Bioconductor@r-project.org > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > [[alternative HTML version deleted]]
ADD COMMENT

Login before adding your answer.

Traffic: 663 users visited in the last hour
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6