biomaRt error in getGene
3
0
Entering edit mode
Georg Otto ▴ 510
@georg-otto-956
Last seen 10.2 years ago
Hi, I have a problem using biomaRt. I want to retrieve information connected to a probe, and do something like this: > mart<-useMart("ensembl", dataset="drerio_gene_ensembl") Checking attributes and filters ... ok > getAffyArrays(mart) [1] "affy_zebrafish" > getGene(id="Dr.1.1.S1_at", array="affy_zebrafish", mart=mart) Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", chrname, : attribute: hgnc_symbol not found, please use the function 'listAttributes' to get valid attribute names > listAttributes(mart=mart) <snip> [8] "adf_swissprot" [9] "affy_zebrafish" [10] "affy_zebrafish_primary_db" [11] "agilent_g2518a" <snip> So it seems that the attribute "affy_zebrafish" exists. What is wrong here? I had this problem before, and I got a reply from Steffen Durinck (see below) that it has to do with an inconistency in attribute and filter naming, i.e. the attribute for the affyids was zebrafish_affy and the filter was called affy_zebrafish. I was told that this will be fixed in the next ensembl release. It seems that the diffrence between the array and the attribute has been repaired, since both are now called affy_zebrafish, but the problem still persists. > sessionInfo() Version 2.3.1 (2006-06-01) powerpc-apple-darwin8.6.0 attached base packages: [1] "methods" "stats" "graphics" "grDevices" "utils" "datasets" [7] "base" other attached packages: DBI biomaRt RCurl XML "0.1-10" "1.6.0" "0.6-2" "0.99-7" Cheers, Georg > Hi, > >> My understanding is that the BioMart folks are making changes to the >> table names for the BioMart database, and this is happening right now >> (e.g, right after BioC 1.8 is released). Unfortunately this means that >> some of the convenience functions like getGene() are being broken. > > This is correct however here there is a problem with the zebrafish dataset > as well. Part of the error here is produced by an inconistency in > attribute and filter naming. The attribute for the affyids is > zebrafish_affy and the filter is called affy_zebrafish. The getGene > function expects these to have the same name and thus generates an error. > > To make the BioMart datasets better we can post these inconsistencies to > the corresponding BioMart mailinglist (in this case the Ensembl helpdesk) > so they get fixed in the next database release. > > Best, > Steffen > >> Hi Georg, >> >> Georg Otto wrote: >>> Hi, >>> >>> using biomaRt, I get an error: >>> >>> >>>>mart<-useMart("ensembl", dataset= "drerio_gene_ensembl") >>>>getAffyArrays(mart) >>> >>> [1] "affy_zebrafish" >>> >>>>getGene(id=genes.regulated.mas5, array="affy_zebrafish" , mart=mart) >>> >>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>> chrname, : >>> attribute: affy_zebrafish not found, please use the function >>> 'listAttributes' to get valid attribute names >>> >>> >>> Then I use listAttributes() as requested: >>> >>> >>>>listAttributes(mart=mart) >>> >>> >>> and get the following output: >>> >>> <snip> >>> [309] "zebrafish_affy" >>> [310] "zebrafish_affy_primary_db" >>> <snip> >>> >>> using "zebrafish_affy" instead of "affy_zebrafish" does not help, >>> however: >>> >>> >>>>getGene(id=genes.regulated.mas5, array="zebrafish_affy" , mart=mart) >>> >>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>> chrname, : >>> attribute: hgnc_symbol not found, please use the function >>> 'listAttributes' to get valid attribute names >>> >>> Any hint will be appreciated. >> >> My understanding is that the BioMart folks are making changes to the >> table names for the BioMart database, and this is happening right now >> (e.g, right after BioC 1.8 is released). Unfortunately this means that >> some of the convenience functions like getGene() are being broken. >> >> I think your best bet is to use getBM() directly, and query for things >> that you see when you do listAttributes(mart). >> >> HTH, >> >> Jim
probe biomaRt probe biomaRt • 2.1k views
ADD COMMENT
0
Entering edit mode
@steffen-durinck-1780
Last seen 10.2 years ago
Hi Georg, You need to use the latest version of biomaRt 1.7.3 for getGene to work with zebrafish (See developmental packages). http://www.bioconductor.org/packages/1.9/bioc/html/biomaRt.html Also have a look at the getBM, listAttributes and listFilters functions...these are robust against Ensembl database changes and allow you to query more than what is possible with the simple biomaRt functions such as getGene. Best, Steffen Georg Otto wrote: > Hi, > > I have a problem using biomaRt. I want to retrieve information connected to a probe, and do something like this: > > >> mart<-useMart("ensembl", dataset="drerio_gene_ensembl") >> > Checking attributes and filters ... ok > >> getAffyArrays(mart) >> > [1] "affy_zebrafish" > >> getGene(id="Dr.1.1.S1_at", array="affy_zebrafish", mart=mart) >> > Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", chrname, : > attribute: hgnc_symbol not found, please use the function 'listAttributes' to get valid attribute names > > > >> listAttributes(mart=mart) >> > > <snip> > [8] "adf_swissprot" > [9] "affy_zebrafish" > [10] "affy_zebrafish_primary_db" > [11] "agilent_g2518a" > <snip> > > So it seems that the attribute "affy_zebrafish" exists. > > What is wrong here? I had this problem before, and I got a reply from > Steffen Durinck (see below) that it has to do with an inconistency in > attribute and filter naming, i.e. the attribute for the affyids was > zebrafish_affy and the filter was called affy_zebrafish. I was told > that this will be fixed in the next ensembl release. It seems that the > diffrence between the array and the attribute has been repaired, since > both are now called affy_zebrafish, but the problem still persists. > > >> sessionInfo() >> > Version 2.3.1 (2006-06-01) > powerpc-apple-darwin8.6.0 > > attached base packages: > [1] "methods" "stats" "graphics" "grDevices" "utils" "datasets" > [7] "base" > > other attached packages: > DBI biomaRt RCurl XML > "0.1-10" "1.6.0" "0.6-2" "0.99-7" > > Cheers, > > Georg > > > > >> Hi, >> >> >>> My understanding is that the BioMart folks are making changes to the >>> table names for the BioMart database, and this is happening right now >>> (e.g, right after BioC 1.8 is released). Unfortunately this means that >>> some of the convenience functions like getGene() are being broken. >>> > > > >> This is correct however here there is a problem with the zebrafish dataset >> as well. Part of the error here is produced by an inconistency in >> attribute and filter naming. The attribute for the affyids is >> zebrafish_affy and the filter is called affy_zebrafish. The getGene >> function expects these to have the same name and thus generates an error. >> >> To make the BioMart datasets better we can post these inconsistencies to >> the corresponding BioMart mailinglist (in this case the Ensembl helpdesk) >> so they get fixed in the next database release. >> >> Best, >> Steffen >> >> >>> Hi Georg, >>> >>> Georg Otto wrote: >>> >>>> Hi, >>>> >>>> using biomaRt, I get an error: >>>> >>>> >>>> >>>>> mart<-useMart("ensembl", dataset= "drerio_gene_ensembl") >>>>> getAffyArrays(mart) >>>>> >>>> [1] "affy_zebrafish" >>>> >>>> >>>>> getGene(id=genes.regulated.mas5, array="affy_zebrafish" , mart=mart) >>>>> >>>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>>> chrname, : >>>> attribute: affy_zebrafish not found, please use the function >>>> 'listAttributes' to get valid attribute names >>>> >>>> >>>> Then I use listAttributes() as requested: >>>> >>>> >>>> >>>>> listAttributes(mart=mart) >>>>> >>>> and get the following output: >>>> >>>> <snip> >>>> [309] "zebrafish_affy" >>>> [310] "zebrafish_affy_primary_db" >>>> <snip> >>>> >>>> using "zebrafish_affy" instead of "affy_zebrafish" does not help, >>>> however: >>>> >>>> >>>> >>>>> getGene(id=genes.regulated.mas5, array="zebrafish_affy" , mart=mart) >>>>> >>>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>>> chrname, : >>>> attribute: hgnc_symbol not found, please use the function >>>> 'listAttributes' to get valid attribute names >>>> >>>> Any hint will be appreciated. >>>> >>> My understanding is that the BioMart folks are making changes to the >>> table names for the BioMart database, and this is happening right now >>> (e.g, right after BioC 1.8 is released). Unfortunately this means that >>> some of the convenience functions like getGene() are being broken. >>> >>> I think your best bet is to use getBM() directly, and query for things >>> that you see when you do listAttributes(mart). >>> >>> HTH, >>> >>> Jim >>> > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor > -- Steffen Durinck, Ph.D. Oncogenomics Section Pediatric Oncology Branch National Cancer Institute, National Institutes of Health URL: http://home.ccr.cancer.gov/oncology/oncogenomics/ Phone: 301-402-8103 Address: Advanced Technology Center, 8717 Grovemont Circle Gaithersburg, MD 20877
ADD COMMENT
0
Entering edit mode
Georg Otto ▴ 510
@georg-otto-956
Last seen 10.2 years ago
Hi Steffen, thanks for your help. I updated to biomaRt 1.7.3 and followed your advice. What I got is this: > mart <- useMart("ensembl") > mart<-useDataset("drerio_gene_ensembl", mart) > getGene(id="Dr.10336.1.S1_at", array="affy_zebrafish", mart=mart) NULL then I tried with getBM > getBM(attributes=c("ensembl_transcript_id", "affy_zebrafish", "refseq_dna"), filters="affy_zebrafish", values="Dr.10336.1.S1_at", mart=mart) NULL I tried with several different affymetrix probes that should be annotated in ensembl, but all of them gave me a "NULL" > sessionInfo() Version 2.3.0 (2006-04-24) x86_64-redhat-linux-gnu attached base packages: [1] "stats" "graphics" "grDevices" "utils" "datasets" "methods" [7] "base" other attached packages: biomaRt RCurl XML "1.7.3" "0.6-2" "0.99-7" Any idea what could be wrong here? Best, Georg Steffen Durinck <durincks at="" mail.nih.gov=""> writes: > Hi Georg, > > You need to use the latest version of biomaRt 1.7.3 for getGene to work > with zebrafish (See developmental packages). > http://www.bioconductor.org/packages/1.9/bioc/html/biomaRt.html > > Also have a look at the getBM, listAttributes and listFilters > functions...these are robust against Ensembl database changes and allow > you to query more than what is possible with the simple biomaRt > functions such as getGene. > > Best, > Steffen > > Georg Otto wrote: >> Hi, >> >> I have a problem using biomaRt. I want to retrieve information connected to a probe, and do something like this: >> >> >>> mart<-useMart("ensembl", dataset="drerio_gene_ensembl") >>> >> Checking attributes and filters ... ok >> >>> getAffyArrays(mart) >>> >> [1] "affy_zebrafish" >> >>> getGene(id="Dr.1.1.S1_at", array="affy_zebrafish", mart=mart) >>> >> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", chrname, : >> attribute: hgnc_symbol not found, please use the function 'listAttributes' to get valid attribute names >> >> >> >>> listAttributes(mart=mart) >>> >> >> <snip> >> [8] "adf_swissprot" >> [9] "affy_zebrafish" >> [10] "affy_zebrafish_primary_db" >> [11] "agilent_g2518a" >> <snip> >> >> So it seems that the attribute "affy_zebrafish" exists. >> >> What is wrong here? I had this problem before, and I got a reply from >> Steffen Durinck (see below) that it has to do with an inconistency in >> attribute and filter naming, i.e. the attribute for the affyids was >> zebrafish_affy and the filter was called affy_zebrafish. I was told >> that this will be fixed in the next ensembl release. It seems that the >> diffrence between the array and the attribute has been repaired, since >> both are now called affy_zebrafish, but the problem still persists. >> >> >>> sessionInfo() >>> >> Version 2.3.1 (2006-06-01) >> powerpc-apple-darwin8.6.0 >> >> attached base packages: >> [1] "methods" "stats" "graphics" "grDevices" "utils" "datasets" >> [7] "base" >> >> other attached packages: >> DBI biomaRt RCurl XML >> "0.1-10" "1.6.0" "0.6-2" "0.99-7" >> >> Cheers, >> >> Georg >> >> >> >> >>> Hi, >>> >>> >>>> My understanding is that the BioMart folks are making changes to the >>>> table names for the BioMart database, and this is happening right now >>>> (e.g, right after BioC 1.8 is released). Unfortunately this means that >>>> some of the convenience functions like getGene() are being broken. >>>> >> >> >> >>> This is correct however here there is a problem with the zebrafish dataset >>> as well. Part of the error here is produced by an inconistency in >>> attribute and filter naming. The attribute for the affyids is >>> zebrafish_affy and the filter is called affy_zebrafish. The getGene >>> function expects these to have the same name and thus generates an error. >>> >>> To make the BioMart datasets better we can post these inconsistencies to >>> the corresponding BioMart mailinglist (in this case the Ensembl helpdesk) >>> so they get fixed in the next database release. >>> >>> Best, >>> Steffen >>> >>> >>>> Hi Georg, >>>> >>>> Georg Otto wrote: >>>> >>>>> Hi, >>>>> >>>>> using biomaRt, I get an error: >>>>> >>>>> >>>>> >>>>>> mart<-useMart("ensembl", dataset= "drerio_gene_ensembl") >>>>>> getAffyArrays(mart) >>>>>> >>>>> [1] "affy_zebrafish" >>>>> >>>>> >>>>>> getGene(id=genes.regulated.mas5, array="affy_zebrafish" , mart=mart) >>>>>> >>>>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>>>> chrname, : >>>>> attribute: affy_zebrafish not found, please use the function >>>>> 'listAttributes' to get valid attribute names >>>>> >>>>> >>>>> Then I use listAttributes() as requested: >>>>> >>>>> >>>>> >>>>>> listAttributes(mart=mart) >>>>>> >>>>> and get the following output: >>>>> >>>>> <snip> >>>>> [309] "zebrafish_affy" >>>>> [310] "zebrafish_affy_primary_db" >>>>> <snip> >>>>> >>>>> using "zebrafish_affy" instead of "affy_zebrafish" does not help, >>>>> however: >>>>> >>>>> >>>>> >>>>>> getGene(id=genes.regulated.mas5, array="zebrafish_affy" , mart=mart) >>>>>> >>>>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>>>> chrname, : >>>>> attribute: hgnc_symbol not found, please use the function >>>>> 'listAttributes' to get valid attribute names >>>>> >>>>> Any hint will be appreciated. >>>>> >>>> My understanding is that the BioMart folks are making changes to the >>>> table names for the BioMart database, and this is happening right now >>>> (e.g, right after BioC 1.8 is released). Unfortunately this means that >>>> some of the convenience functions like getGene() are being broken. >>>> >>>> I think your best bet is to use getBM() directly, and query for things >>>> that you see when you do listAttributes(mart). >>>> >>>> HTH, >>>> >>>> Jim >>>> >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >> > > > -- > Steffen Durinck, Ph.D. > > Oncogenomics Section > Pediatric Oncology Branch > National Cancer Institute, National Institutes of Health > URL: http://home.ccr.cancer.gov/oncology/oncogenomics/ > > Phone: 301-402-8103 > Address: > Advanced Technology Center, > 8717 Grovemont Circle > Gaithersburg, MD 20877 > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor > -- Georg Wilhelm Otto Max-Planck-Institute for Developmental Biology georg.otto at tuebingen.mpg.de
ADD COMMENT
0
Entering edit mode
Hi Georg, I've repeated your query and unfortunately get the same error. When using biomaRt with Ensembl, it should return the same output as the Ensembl BioMart web application (http://www.ensembl.org/Multi/martview). I often use this to verify that biomaRt is properly functioning or to find out if the reported error is due to a database error or due to a bug in the biomaRt package. After doing a query using zebrafish affy ids, the MartView web application also returns no values for affy ids (e.g. querying for all affy ids on zebrafish chromosome 1). It looks thus like there is an error in the zebrafish dataset of Ensembl. Any problems of this type should be reported at the corresponding database so they can be fixed in the next database release. For Ensembl this is helpdesk at ensembl.org. <mailto:helpdesk at="" ensembl.org=""> I'll document this in the biomaRt vignette. Best, Steffen Georg Otto wrote: > Hi Steffen, > > thanks for your help. I updated to biomaRt 1.7.3 and followed your > advice. What I got is this: > > >> mart <- useMart("ensembl") >> mart<-useDataset("drerio_gene_ensembl", mart) >> > > >> getGene(id="Dr.10336.1.S1_at", array="affy_zebrafish", mart=mart) >> > NULL > > then I tried with getBM > > >> getBM(attributes=c("ensembl_transcript_id", "affy_zebrafish", "refseq_dna"), filters="affy_zebrafish", values="Dr.10336.1.S1_at", mart=mart) >> > NULL > > I tried with several different affymetrix probes that should be > annotated in ensembl, but all of them gave me a "NULL" > > >> sessionInfo() >> > Version 2.3.0 (2006-04-24) > x86_64-redhat-linux-gnu > > attached base packages: > [1] "stats" "graphics" "grDevices" "utils" "datasets" "methods" > [7] "base" > > other attached packages: > biomaRt RCurl XML > "1.7.3" "0.6-2" "0.99-7" > > Any idea what could be wrong here? > > Best, > > Georg > > > Steffen Durinck <durincks at="" mail.nih.gov=""> writes: > > >> Hi Georg, >> >> You need to use the latest version of biomaRt 1.7.3 for getGene to work >> with zebrafish (See developmental packages). >> http://www.bioconductor.org/packages/1.9/bioc/html/biomaRt.html >> >> Also have a look at the getBM, listAttributes and listFilters >> functions...these are robust against Ensembl database changes and allow >> you to query more than what is possible with the simple biomaRt >> functions such as getGene. >> >> Best, >> Steffen >> >> Georg Otto wrote: >> >>> Hi, >>> >>> I have a problem using biomaRt. I want to retrieve information connected to a probe, and do something like this: >>> >>> >>> >>>> mart<-useMart("ensembl", dataset="drerio_gene_ensembl") >>>> >>>> >>> Checking attributes and filters ... ok >>> >>> >>>> getAffyArrays(mart) >>>> >>>> >>> [1] "affy_zebrafish" >>> >>> >>>> getGene(id="Dr.1.1.S1_at", array="affy_zebrafish", mart=mart) >>>> >>>> >>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", chrname, : >>> attribute: hgnc_symbol not found, please use the function 'listAttributes' to get valid attribute names >>> >>> >>> >>> >>>> listAttributes(mart=mart) >>>> >>>> >>> <snip> >>> [8] "adf_swissprot" >>> [9] "affy_zebrafish" >>> [10] "affy_zebrafish_primary_db" >>> [11] "agilent_g2518a" >>> <snip> >>> >>> So it seems that the attribute "affy_zebrafish" exists. >>> >>> What is wrong here? I had this problem before, and I got a reply from >>> Steffen Durinck (see below) that it has to do with an inconistency in >>> attribute and filter naming, i.e. the attribute for the affyids was >>> zebrafish_affy and the filter was called affy_zebrafish. I was told >>> that this will be fixed in the next ensembl release. It seems that the >>> diffrence between the array and the attribute has been repaired, since >>> both are now called affy_zebrafish, but the problem still persists. >>> >>> >>> >>>> sessionInfo() >>>> >>>> >>> Version 2.3.1 (2006-06-01) >>> powerpc-apple-darwin8.6.0 >>> >>> attached base packages: >>> [1] "methods" "stats" "graphics" "grDevices" "utils" "datasets" >>> [7] "base" >>> >>> other attached packages: >>> DBI biomaRt RCurl XML >>> "0.1-10" "1.6.0" "0.6-2" "0.99-7" >>> >>> Cheers, >>> >>> Georg >>> >>> >>> >>> >>> >>>> Hi, >>>> >>>> >>>> >>>>> My understanding is that the BioMart folks are making changes to the >>>>> table names for the BioMart database, and this is happening right now >>>>> (e.g, right after BioC 1.8 is released). Unfortunately this means that >>>>> some of the convenience functions like getGene() are being broken. >>>>> >>>>> >>> >>> >>>> This is correct however here there is a problem with the zebrafish dataset >>>> as well. Part of the error here is produced by an inconistency in >>>> attribute and filter naming. The attribute for the affyids is >>>> zebrafish_affy and the filter is called affy_zebrafish. The getGene >>>> function expects these to have the same name and thus generates an error. >>>> >>>> To make the BioMart datasets better we can post these inconsistencies to >>>> the corresponding BioMart mailinglist (in this case the Ensembl helpdesk) >>>> so they get fixed in the next database release. >>>> >>>> Best, >>>> Steffen >>>> >>>> >>>> >>>>> Hi Georg, >>>>> >>>>> Georg Otto wrote: >>>>> >>>>> >>>>>> Hi, >>>>>> >>>>>> using biomaRt, I get an error: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> mart<-useMart("ensembl", dataset= "drerio_gene_ensembl") >>>>>>> getAffyArrays(mart) >>>>>>> >>>>>>> >>>>>> [1] "affy_zebrafish" >>>>>> >>>>>> >>>>>> >>>>>>> getGene(id=genes.regulated.mas5, array="affy_zebrafish" , mart=mart) >>>>>>> >>>>>>> >>>>>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>>>>> chrname, : >>>>>> attribute: affy_zebrafish not found, please use the function >>>>>> 'listAttributes' to get valid attribute names >>>>>> >>>>>> >>>>>> Then I use listAttributes() as requested: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> listAttributes(mart=mart) >>>>>>> >>>>>>> >>>>>> and get the following output: >>>>>> >>>>>> <snip> >>>>>> [309] "zebrafish_affy" >>>>>> [310] "zebrafish_affy_primary_db" >>>>>> <snip> >>>>>> >>>>>> using "zebrafish_affy" instead of "affy_zebrafish" does not help, >>>>>> however: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> getGene(id=genes.regulated.mas5, array="zebrafish_affy" , mart=mart) >>>>>>> >>>>>>> >>>>>> Error in getBM(attributes = c(attrib, "hgnc_symbol", "description", >>>>>> chrname, : >>>>>> attribute: hgnc_symbol not found, please use the function >>>>>> 'listAttributes' to get valid attribute names >>>>>> >>>>>> Any hint will be appreciated. >>>>>> >>>>>> >>>>> My understanding is that the BioMart folks are making changes to the >>>>> table names for the BioMart database, and this is happening right now >>>>> (e.g, right after BioC 1.8 is released). Unfortunately this means that >>>>> some of the convenience functions like getGene() are being broken. >>>>> >>>>> I think your best bet is to use getBM() directly, and query for things >>>>> that you see when you do listAttributes(mart). >>>>> >>>>> HTH, >>>>> >>>>> Jim >>>>> >>>>> >>> _______________________________________________ >>> Bioconductor mailing list >>> Bioconductor at stat.math.ethz.ch >>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >>> >>> >> -- >> Steffen Durinck, Ph.D. >> >> Oncogenomics Section >> Pediatric Oncology Branch >> National Cancer Institute, National Institutes of Health >> URL: http://home.ccr.cancer.gov/oncology/oncogenomics/ >> >> Phone: 301-402-8103 >> Address: >> Advanced Technology Center, >> 8717 Grovemont Circle >> Gaithersburg, MD 20877 >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >> >> > > -- Steffen Durinck, Ph.D. Oncogenomics Section Pediatric Oncology Branch National Cancer Institute, National Institutes of Health URL: http://home.ccr.cancer.gov/oncology/oncogenomics/ Phone: 301-402-8103 Address: Advanced Technology Center, 8717 Grovemont Circle Gaithersburg, MD 20877
ADD REPLY
0
Entering edit mode
An embedded and charset-unspecified text was scrubbed... Name: not available Url: https://stat.ethz.ch/pipermail/bioconductor/attachments/20060713/ 0c4d7de7/attachment.pl
ADD REPLY
0
Entering edit mode
Georg Otto ▴ 510
@georg-otto-956
Last seen 10.2 years ago
Besides "affy_zebrafish" there is also an attribute "affy_zebrafish_primary_id". Could this have something to do with the problem, or could I use "affy_zebrafish_primary_id" instead of "affy_zebrafish"? Sorry for the naive question, but I am not very familiar with ensembl/biomart... Cheers, Georg Steffen Durinck <durincks at="" mail.nih.gov=""> writes: > Hi Georg, > > I've repeated your query and unfortunately get the same error. > When using biomaRt with Ensembl, it should return the same output as > the Ensembl BioMart web application (http://www.ensembl.org/Multi/martview). > I often use this to verify that biomaRt is properly functioning or to > find out if the reported error is due to a database error or due to a > bug in the biomaRt package. > > After doing a query using zebrafish affy ids, the MartView web > application also returns no values for affy ids (e.g. querying for all > affy ids on zebrafish chromosome 1). > It looks thus like there is an error in the zebrafish dataset of > Ensembl. Any problems of this type should be reported at the > corresponding database so they can be fixed in the next database > release. For Ensembl this is helpdesk at ensembl.org. > <mailto:helpdesk at="" ensembl.org=""> > I'll document this in the biomaRt vignette. > > Best, > Steffen > > > > Georg Otto wrote: >> Hi Steffen, >> >> thanks for your help. I updated to biomaRt 1.7.3 and followed your >> advice. What I got is this: >> >> >>> mart <- useMart("ensembl") >>> mart<-useDataset("drerio_gene_ensembl", mart) >>> >> >> >>> getGene(id="Dr.10336.1.S1_at", array="affy_zebrafish", mart=mart) >>> >> NULL >> >> then I tried with getBM >> >> >>> getBM(attributes=c("ensembl_transcript_id", "affy_zebrafish", "refseq_dna"), filters="affy_zebrafish", values="Dr.10336.1.S1_at", mart=mart) >>> >> NULL >> >> I tried with several different affymetrix probes that should be >> annotated in ensembl, but all of them gave me a "NULL" >> >> >>> sessionInfo() >>> >> Version 2.3.0 (2006-04-24) >> x86_64-redhat-linux-gnu >> >> attached base packages: >> [1] "stats" "graphics" "grDevices" "utils" "datasets" "methods" >> [7] "base" >> >> other attached packages: >> biomaRt RCurl XML >> "1.7.3" "0.6-2" "0.99-7" >> >> Any idea what could be wrong here? >> >> Best, >> >> Georg
ADD COMMENT

Login before adding your answer.

Traffic: 702 users visited in the last hour
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6