Question: Ensembl IDs 2 GO term enrichment --> simple solution without biomart? ( I can't install it because of RCurl)
0
gravatar for Emmanuel Levy
11.1 years ago by
Emmanuel Levy270
Emmanuel Levy270 wrote:
Dear list members, I'd like to carry out a GO TERM enrichment analysis based on ENSEMBL IDs and the GOstats package. Though I have problems installing biomaRt, which I reported to the R mailing list, I was wondering how to use GOstats with biomaRt, i.e., what should be specified for the "annotation package"? Also, I was wondering if by any chance, somebody could think of a way around biomaRt if I can't manage to install it. Many thanks for your help, Best wishes, Emmanuel ========================================== Email sent to the R mailing list: Subject: RCurl compilation error on ubuntu hardy Dear list members, I encountered this problem and the solution pointed out in a previous thread did not work for me. (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. I really need RCurl in order to use biomaRt ... any help would be greatly appreciated. Best wishes, Emmanuel ================================================= > sessionInfo() R version 2.6.2 (2008-02-08) x86_64-pc-linux-gnu locale: LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE=en_CA .UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=en_CA. UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA.UTF-8 ;LC_IDENTIFICATION=C attached base packages: [1] stats graphics grDevices utils datasets methods base loaded via a namespace (and not attached): [1] rcompgen_0.1-17 tools_2.6.2 > ================================================= > install.packages("RCurl", repos = "http://www.omegahat.org/R") Warning in install.packages("RCurl", repos = "http://www.omegahat.org/R") : argument 'lib' is missing: using '/usr/local/lib/R/site-library' trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' Content type 'application/x-gzip' length 150884 bytes (147 Kb) opened URL ================================================== downloaded 147 Kb * Installing *source* package 'RCurl' ... checking for curl-config... /usr/bin/curl-config checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking how to run the C preprocessor... gcc -E Version has a libidn field configure: creating ./config.status config.status: creating src/Makevars ** libs gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o In file included from base64.c:1: Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' make: *** [base64.o] Error 1 chmod: cannot access `/usr/local/lib/R/site-library/RCurl/libs/*': No such file or directory ERROR: compilation failed for package 'RCurl' ** Removing '/usr/local/lib/R/site-library/RCurl' The downloaded packages are in /tmp/RtmpQ8FMBZ/downloaded_packages Warning message: In install.packages("RCurl", repos = "http://www.omegahat.org/R") : installation of package 'RCurl' had non-zero exit status ====================================================================== ========== Hi Martin, are you working on a 64-bit linux distribution and which version of RCurl are you trying to install? There has been a problem with a recent version of RCurl and the "R_base64_decode", search the archives of the Bioconductor mailing list for a thread called "RCurl loading problem with 64 bit linux distribution". Please try using the newest versions of R (R-2.7.0 has been released a few weeks ago) and RCurl, which you can obtain from within R by typing: install.packages("RCurl", repos = "http://www.omegahat.org/R") The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 and 0.9.1 did not. Hope this helps. Joern martin sikora wrote: dear list members, i'm having a problem installing the biomaRt package on my linux machine, due to the fact of a compilation error with RCurl. i am using R 2.6.2 on fedora 7, and this is the output i get: gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -c base64.c -o base64.o In file included from base64.c:1: Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? base64.c: In function ?R_base64_decode?: base64.c:25: warning: pointer targets in assignment differ in signedness base64.c:39: warning: pointer targets in passing argument 1 of ?Rf_mkString? differ in signedness base64.c: In function ?R_base64_encode?: base64.c:60: warning: pointer targets in assignment differ in signedness make: *** [base64.o] Error 1 as far as i know i have all the necessary libraries installed: $ yum list installed | grep libxml libxml2.i386 2.6.31-1.fc7 installed libxml2-devel.i386 2.6.31-1.fc7 installed libxml2-python.i386 2.6.31-1.fc7 installed perl-libxml-perl.noarch 0.08-1.2.1 installed $ yum list installed | grep curl curl.i386 7.16.4-1.fc7 installed curl-devel.i386 7.16.4-1.fc7 installed python-pycurl.i386 7.16.0-0.1.20061207.fc installed as i am not an expert in linux stuff, i was wondering if there could be any other missing libraries? any other ideas? cheers martin
go gostats biomart • 756 views
ADD COMMENTlink modified 11.1 years ago by rgentleman5.5k • written 11.1 years ago by Emmanuel Levy270
Answer: Ensembl IDs 2 GO term enrichment --> simple solution without biomart? ( I can't
0
gravatar for Sean Davis
11.1 years ago by
Sean Davis21k
United States
Sean Davis21k wrote:
On Wed, Sep 17, 2008 at 2:13 AM, Emmanuel Levy <emmanuel.levy at="" gmail.com=""> wrote: > Dear list members, > > I'd like to carry out a GO TERM enrichment analysis based on ENSEMBL > IDs and the GOstats package. > > Though I have problems installing biomaRt, which I reported to the R > mailing list, I was wondering how to use GOstats with biomaRt, i.e., > what should be specified for the "annotation package"? > > Also, I was wondering if by any chance, somebody could think of a way > around biomaRt if I can't manage to install it. > > Many thanks for your help, > > Best wishes, > > Emmanuel > > > ========================================== > Email sent to the R mailing list: > > Subject: RCurl compilation error on ubuntu hardy > > Dear list members, > > I encountered this problem and the solution pointed out in a previous > thread did not work for me. > (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") > > I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. > > I really need RCurl in order to use biomaRt ... any help would be > greatly appreciated. Hi, Emmanuel. What happened when you upgraded R and tried to install the newest version of RCurl? Did that make a difference? Sean > ================================================= > >> sessionInfo() > R version 2.6.2 (2008-02-08) > x86_64-pc-linux-gnu > > locale: > LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE=en_ CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=en_C A.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA.UTF -8;LC_IDENTIFICATION=C > > attached base packages: > [1] stats graphics grDevices utils datasets methods base > > loaded via a namespace (and not attached): > [1] rcompgen_0.1-17 tools_2.6.2 >> > > ================================================= > > >> install.packages("RCurl", repos = "http://www.omegahat.org/R") > Warning in install.packages("RCurl", repos = "http://www.omegahat.org/R") : > argument 'lib' is missing: using '/usr/local/lib/R/site-library' > trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' > Content type 'application/x-gzip' length 150884 bytes (147 Kb) > opened URL > ================================================== > downloaded 147 Kb > > * Installing *source* package 'RCurl' ... > checking for curl-config... /usr/bin/curl-config > checking for gcc... gcc > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ANSI C... none needed > checking how to run the C preprocessor... gcc -E > Version has a libidn field > configure: creating ./config.status > config.status: creating src/Makevars > ** libs > gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include > -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o > In file included from base64.c:1: > Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' > make: *** [base64.o] Error 1 > chmod: cannot access `/usr/local/lib/R/site-library/RCurl/libs/*': No > such file or directory > ERROR: compilation failed for package 'RCurl' > ** Removing '/usr/local/lib/R/site-library/RCurl' > > The downloaded packages are in > /tmp/RtmpQ8FMBZ/downloaded_packages > Warning message: > In install.packages("RCurl", repos = "http://www.omegahat.org/R") : > installation of package 'RCurl' had non-zero exit status > > ==================================================================== ============ > > Hi Martin, > are you working on a 64-bit linux distribution and which version of > RCurl are you trying to install? There has been a problem with a > recent version of RCurl and the "R_base64_decode", search the archives > of the Bioconductor mailing list for a thread called > "RCurl loading problem with 64 bit linux distribution". > Please try using the newest versions of R (R-2.7.0 has been released a > few weeks ago) and RCurl, which you can obtain from within R by > typing: > install.packages("RCurl", repos = "http://www.omegahat.org/R") > The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 > and 0.9.1 did not. > Hope this helps. > Joern > > > martin sikora wrote: > > dear list members, > > i'm having a problem installing the biomaRt package on my linux > machine, due to the fact of a compilation error with RCurl. i am using > R 2.6.2 on fedora 7, and this is the output i get: > > gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R > -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe > -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector > --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic > -fasynchronous-unwind-tables -c base64.c -o base64.o > In file included from base64.c:1: > Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? > base64.c: In function ?R_base64_decode?: > base64.c:25: warning: pointer targets in assignment differ in signedness > base64.c:39: warning: pointer targets in passing argument 1 of > ?Rf_mkString? differ in signedness > base64.c: In function ?R_base64_encode?: > base64.c:60: warning: pointer targets in assignment differ in signedness > make: *** [base64.o] Error 1 > > as far as i know i have all the necessary libraries installed: > > $ yum list installed | grep libxml > libxml2.i386 2.6.31-1.fc7 > installed libxml2-devel.i386 2.6.31-1.fc7 > installed libxml2-python.i386 > 2.6.31-1.fc7 installed perl-libxml-perl.noarch > 0.08-1.2.1 installed > $ yum list installed | grep curl > curl.i386 7.16.4-1.fc7 > installed curl-devel.i386 7.16.4-1.fc7 > installed python-pycurl.i386 > 7.16.0-0.1.20061207.fc installed > > as i am not an expert in linux stuff, i was wondering if there > could be any other missing libraries? any other ideas? > > cheers > martin > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >
ADD COMMENTlink written 11.1 years ago by Sean Davis21k
Dear Sean, That was indeed the issue. I tried to upgrade R yesterday but it didn't work and I had (i) to add a CRAN mirror to the list of Ubuntu package repositories. (ii) use aptitude instead of apt-get because apt-get held back the update for some reason. I'm happy to say that the issue is now fixed! Many thanks, Best wishes, Emmanuel 2008/9/17 Sean Davis <sdavis2 at="" mail.nih.gov="">: > On Wed, Sep 17, 2008 at 2:13 AM, Emmanuel Levy <emmanuel.levy at="" gmail.com=""> wrote: >> Dear list members, >> >> I'd like to carry out a GO TERM enrichment analysis based on ENSEMBL >> IDs and the GOstats package. >> >> Though I have problems installing biomaRt, which I reported to the R >> mailing list, I was wondering how to use GOstats with biomaRt, i.e., >> what should be specified for the "annotation package"? >> >> Also, I was wondering if by any chance, somebody could think of a way >> around biomaRt if I can't manage to install it. >> >> Many thanks for your help, >> >> Best wishes, >> >> Emmanuel >> >> >> ========================================== >> Email sent to the R mailing list: >> >> Subject: RCurl compilation error on ubuntu hardy >> >> Dear list members, >> >> I encountered this problem and the solution pointed out in a previous >> thread did not work for me. >> (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") >> >> I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. >> >> I really need RCurl in order to use biomaRt ... any help would be >> greatly appreciated. > > Hi, Emmanuel. What happened when you upgraded R and tried to install > the newest version of RCurl? Did that make a difference? > > Sean > >> ================================================= >> >>> sessionInfo() >> R version 2.6.2 (2008-02-08) >> x86_64-pc-linux-gnu >> >> locale: >> LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE=en _CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=en_ CA.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA.UT F-8;LC_IDENTIFICATION=C >> >> attached base packages: >> [1] stats graphics grDevices utils datasets methods base >> >> loaded via a namespace (and not attached): >> [1] rcompgen_0.1-17 tools_2.6.2 >>> >> >> ================================================= >> >> >>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >> Warning in install.packages("RCurl", repos = "http://www.omegahat.org/R") : >> argument 'lib' is missing: using '/usr/local/lib/R/site-library' >> trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' >> Content type 'application/x-gzip' length 150884 bytes (147 Kb) >> opened URL >> ================================================== >> downloaded 147 Kb >> >> * Installing *source* package 'RCurl' ... >> checking for curl-config... /usr/bin/curl-config >> checking for gcc... gcc >> checking for C compiler default output file name... a.out >> checking whether the C compiler works... yes >> checking whether we are cross compiling... no >> checking for suffix of executables... >> checking for suffix of object files... o >> checking whether we are using the GNU C compiler... yes >> checking whether gcc accepts -g... yes >> checking for gcc option to accept ANSI C... none needed >> checking how to run the C preprocessor... gcc -E >> Version has a libidn field >> configure: creating ./config.status >> config.status: creating src/Makevars >> ** libs >> gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include >> -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o >> In file included from base64.c:1: >> Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' >> make: *** [base64.o] Error 1 >> chmod: cannot access `/usr/local/lib/R/site-library/RCurl/libs/*': No >> such file or directory >> ERROR: compilation failed for package 'RCurl' >> ** Removing '/usr/local/lib/R/site-library/RCurl' >> >> The downloaded packages are in >> /tmp/RtmpQ8FMBZ/downloaded_packages >> Warning message: >> In install.packages("RCurl", repos = "http://www.omegahat.org/R") : >> installation of package 'RCurl' had non-zero exit status >> >> =================================================================== ============= >> >> Hi Martin, >> are you working on a 64-bit linux distribution and which version of >> RCurl are you trying to install? There has been a problem with a >> recent version of RCurl and the "R_base64_decode", search the archives >> of the Bioconductor mailing list for a thread called >> "RCurl loading problem with 64 bit linux distribution". >> Please try using the newest versions of R (R-2.7.0 has been released a >> few weeks ago) and RCurl, which you can obtain from within R by >> typing: >> install.packages("RCurl", repos = "http://www.omegahat.org/R") >> The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 >> and 0.9.1 did not. >> Hope this helps. >> Joern >> >> >> martin sikora wrote: >> >> dear list members, >> >> i'm having a problem installing the biomaRt package on my linux >> machine, due to the fact of a compilation error with RCurl. i am using >> R 2.6.2 on fedora 7, and this is the output i get: >> >> gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R >> -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe >> -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector >> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic >> -fasynchronous-unwind-tables -c base64.c -o base64.o >> In file included from base64.c:1: >> Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? >> base64.c: In function ?R_base64_decode?: >> base64.c:25: warning: pointer targets in assignment differ in signedness >> base64.c:39: warning: pointer targets in passing argument 1 of >> ?Rf_mkString? differ in signedness >> base64.c: In function ?R_base64_encode?: >> base64.c:60: warning: pointer targets in assignment differ in signedness >> make: *** [base64.o] Error 1 >> >> as far as i know i have all the necessary libraries installed: >> >> $ yum list installed | grep libxml >> libxml2.i386 2.6.31-1.fc7 >> installed libxml2-devel.i386 2.6.31-1.fc7 >> installed libxml2-python.i386 >> 2.6.31-1.fc7 installed perl-libxml-perl.noarch >> 0.08-1.2.1 installed >> $ yum list installed | grep curl >> curl.i386 7.16.4-1.fc7 >> installed curl-devel.i386 7.16.4-1.fc7 >> installed python-pycurl.i386 >> 7.16.0-0.1.20061207.fc installed >> >> as i am not an expert in linux stuff, i was wondering if there >> could be any other missing libraries? any other ideas? >> >> cheers >> martin >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >> >
ADD REPLYlink written 11.1 years ago by Emmanuel Levy270
Answer: Ensembl IDs 2 GO term enrichment --> simple solution without biomart? ( I can't
0
gravatar for rgentleman
11.1 years ago by
rgentleman5.5k
United States
rgentleman5.5k wrote:
Hi Emmanuel, Emmanuel Levy wrote: > Dear list members, > > I'd like to carry out a GO TERM enrichment analysis based on ENSEMBL > IDs and the GOstats package. That depends a bit on the organism you are wanting to use. For those that are supported by the org.xx.yy.db packages, such as human, org.Hs.eg there are maps in those annotation packages [9] "org.Hs.egENSEMBL2EG" "org.Hs.egENSEMBLPROT" [11] "org.Hs.egENSEMBLPROT2EG" "org.Hs.egENSEMBLTRANS" [13] "org.Hs.egENSEMBLTRANS2EG" "org.Hs.egENZYME" the hardest part, in any of this is typically not the map from one type of identifier to another, but rather correctly identifying the gene universe (those genes that could have been selected), as that usually has a bigger effect on the p-values (and inference) than anything. > > Though I have problems installing biomaRt, which I reported to the R > mailing list, I was wondering how to use GOstats with biomaRt, i.e., > what should be specified for the "annotation package"? I think that that discussion suggested an upgrade of R (which you will need for the tools I have described as well). best wishes Robert > > Also, I was wondering if by any chance, somebody could think of a way > around biomaRt if I can't manage to install it. > > Many thanks for your help, > > Best wishes, > > Emmanuel > > > ========================================== > Email sent to the R mailing list: > > Subject: RCurl compilation error on ubuntu hardy > > Dear list members, > > I encountered this problem and the solution pointed out in a previous > thread did not work for me. > (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") > > I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. > > I really need RCurl in order to use biomaRt ... any help would be > greatly appreciated. > > Best wishes, > > Emmanuel > > ================================================= > >> sessionInfo() > R version 2.6.2 (2008-02-08) > x86_64-pc-linux-gnu > > locale: > LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE=en_ CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=en_C A.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA.UTF -8;LC_IDENTIFICATION=C > > attached base packages: > [1] stats graphics grDevices utils datasets methods base > > loaded via a namespace (and not attached): > [1] rcompgen_0.1-17 tools_2.6.2 > > ================================================= > > >> install.packages("RCurl", repos = "http://www.omegahat.org/R") > Warning in install.packages("RCurl", repos = "http://www.omegahat.org/R") : > argument 'lib' is missing: using '/usr/local/lib/R/site-library' > trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' > Content type 'application/x-gzip' length 150884 bytes (147 Kb) > opened URL > ================================================== > downloaded 147 Kb > > * Installing *source* package 'RCurl' ... > checking for curl-config... /usr/bin/curl-config > checking for gcc... gcc > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ANSI C... none needed > checking how to run the C preprocessor... gcc -E > Version has a libidn field > configure: creating ./config.status > config.status: creating src/Makevars > ** libs > gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include > -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o > In file included from base64.c:1: > Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' > make: *** [base64.o] Error 1 > chmod: cannot access `/usr/local/lib/R/site-library/RCurl/libs/*': No > such file or directory > ERROR: compilation failed for package 'RCurl' > ** Removing '/usr/local/lib/R/site-library/RCurl' > > The downloaded packages are in > /tmp/RtmpQ8FMBZ/downloaded_packages > Warning message: > In install.packages("RCurl", repos = "http://www.omegahat.org/R") : > installation of package 'RCurl' had non-zero exit status > > ==================================================================== ============ > > Hi Martin, > are you working on a 64-bit linux distribution and which version of > RCurl are you trying to install? There has been a problem with a > recent version of RCurl and the "R_base64_decode", search the archives > of the Bioconductor mailing list for a thread called > "RCurl loading problem with 64 bit linux distribution". > Please try using the newest versions of R (R-2.7.0 has been released a > few weeks ago) and RCurl, which you can obtain from within R by > typing: > install.packages("RCurl", repos = "http://www.omegahat.org/R") > The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 > and 0.9.1 did not. > Hope this helps. > Joern > > > martin sikora wrote: > > dear list members, > > i'm having a problem installing the biomaRt package on my linux > machine, due to the fact of a compilation error with RCurl. i am using > R 2.6.2 on fedora 7, and this is the output i get: > > gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R > -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe > -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector > --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic > -fasynchronous-unwind-tables -c base64.c -o base64.o > In file included from base64.c:1: > Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? > base64.c: In function ?R_base64_decode?: > base64.c:25: warning: pointer targets in assignment differ in signedness > base64.c:39: warning: pointer targets in passing argument 1 of > ?Rf_mkString? differ in signedness > base64.c: In function ?R_base64_encode?: > base64.c:60: warning: pointer targets in assignment differ in signedness > make: *** [base64.o] Error 1 > > as far as i know i have all the necessary libraries installed: > > $ yum list installed | grep libxml > libxml2.i386 2.6.31-1.fc7 > installed libxml2-devel.i386 2.6.31-1.fc7 > installed libxml2-python.i386 > 2.6.31-1.fc7 installed perl-libxml-perl.noarch > 0.08-1.2.1 installed > $ yum list installed | grep curl > curl.i386 7.16.4-1.fc7 > installed curl-devel.i386 7.16.4-1.fc7 > installed python-pycurl.i386 > 7.16.0-0.1.20061207.fc installed > > as i am not an expert in linux stuff, i was wondering if there > could be any other missing libraries? any other ideas? > > cheers > martin > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor > -- Robert Gentleman, PhD Program in Computational Biology Division of Public Health Sciences Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N, M2-B876 PO Box 19024 Seattle, Washington 98109-1024 206-667-7700 rgentlem at fhcrc.org
ADD COMMENTlink written 11.1 years ago by rgentleman5.5k
Dear Robert, > That depends a bit on the organism you are wanting to use. For those that > are supported by the org.xx.yy.db packages, such as human, > org.Hs.eg > > there are maps in those annotation packages > [9] "org.Hs.egENSEMBL2EG" "org.Hs.egENSEMBLPROT" > [11] "org.Hs.egENSEMBLPROT2EG" "org.Hs.egENSEMBLTRANS" > [13] "org.Hs.egENSEMBLTRANS2EG" "org.Hs.egENZYME" > Thank you for your reply, I indeed want to annotate human IDs, so the org.Hs.eg.db package looks good! However the help I could find on this package is limited. I understood from the following page: http://gaggle.systemsbiology.net/svn/gaggle/PIPE2.0/trunk/PIPEletResou rceDir/GOTableEnrichment/GOEnrichmentScript.R That "org.Hs.eg.db" can directly be given as the annotation package, but then the IDs should be converted to EntrezIDs. It took me some time to figure it out, but I guess that now I've got to familiarize myself with: http://www.cse.unsw.edu.au/~mike/myrlibrary/AnnotationDbi/html/Bimap.h tml One question though, how to list the annotation packages as you did above? > help.search("org.Hs.eg.db") or > org.Hs.eg.db() didn't help. Finally, I googled for the keywords "GOstats and biomart" and did not find any page that shows how to use them together. (In fact my post from yesterday appears in 3rd position!) Is it so straightforward to use them together and I'm being slow? Or are they incompatible? Thanks again for your help! Best wishes, Emmanuel >> Though I have problems installing biomaRt, which I reported to the R >> mailing list, I was wondering how to use GOstats with biomaRt, i.e., >> what should be specified for the "annotation package"? > > I think that that discussion suggested an upgrade of R (which you will need > for the tools I have described as well). > > best wishes > Robert > >> >> Also, I was wondering if by any chance, somebody could think of a way >> around biomaRt if I can't manage to install it. >> >> Many thanks for your help, >> >> Best wishes, >> >> Emmanuel >> >> >> ========================================== >> Email sent to the R mailing list: >> >> Subject: RCurl compilation error on ubuntu hardy >> >> Dear list members, >> >> I encountered this problem and the solution pointed out in a previous >> thread did not work for me. >> (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") >> >> I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. >> >> I really need RCurl in order to use biomaRt ... any help would be >> greatly appreciated. >> >> Best wishes, >> >> Emmanuel >> >> ================================================= >> >>> sessionInfo() >> >> R version 2.6.2 (2008-02-08) >> x86_64-pc-linux-gnu >> >> locale: >> >> LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE=en _CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=en_ CA.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA.UT F-8;LC_IDENTIFICATION=C >> >> attached base packages: >> [1] stats graphics grDevices utils datasets methods base >> >> loaded via a namespace (and not attached): >> [1] rcompgen_0.1-17 tools_2.6.2 >> >> ================================================= >> >> >>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >> >> Warning in install.packages("RCurl", repos = "http://www.omegahat.org/R") >> : >> argument 'lib' is missing: using '/usr/local/lib/R/site-library' >> trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' >> Content type 'application/x-gzip' length 150884 bytes (147 Kb) >> opened URL >> ================================================== >> downloaded 147 Kb >> >> * Installing *source* package 'RCurl' ... >> checking for curl-config... /usr/bin/curl-config >> checking for gcc... gcc >> checking for C compiler default output file name... a.out >> checking whether the C compiler works... yes >> checking whether we are cross compiling... no >> checking for suffix of executables... >> checking for suffix of object files... o >> checking whether we are using the GNU C compiler... yes >> checking whether gcc accepts -g... yes >> checking for gcc option to accept ANSI C... none needed >> checking how to run the C preprocessor... gcc -E >> Version has a libidn field >> configure: creating ./config.status >> config.status: creating src/Makevars >> ** libs >> gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include >> -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o >> In file included from base64.c:1: >> Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' >> make: *** [base64.o] Error 1 >> chmod: cannot access `/usr/local/lib/R/site-library/RCurl/libs/*': No >> such file or directory >> ERROR: compilation failed for package 'RCurl' >> ** Removing '/usr/local/lib/R/site-library/RCurl' >> >> The downloaded packages are in >> /tmp/RtmpQ8FMBZ/downloaded_packages >> Warning message: >> In install.packages("RCurl", repos = "http://www.omegahat.org/R") : >> installation of package 'RCurl' had non-zero exit status >> >> >> =================================================================== ============= >> >> Hi Martin, >> are you working on a 64-bit linux distribution and which version of >> RCurl are you trying to install? There has been a problem with a >> recent version of RCurl and the "R_base64_decode", search the archives >> of the Bioconductor mailing list for a thread called >> "RCurl loading problem with 64 bit linux distribution". >> Please try using the newest versions of R (R-2.7.0 has been released a >> few weeks ago) and RCurl, which you can obtain from within R by >> typing: >> install.packages("RCurl", repos = "http://www.omegahat.org/R") >> The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 >> and 0.9.1 did not. >> Hope this helps. >> Joern >> >> >> martin sikora wrote: >> >> dear list members, >> >> i'm having a problem installing the biomaRt package on my linux >> machine, due to the fact of a compilation error with RCurl. i am using >> R 2.6.2 on fedora 7, and this is the output i get: >> >> gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R >> -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe >> -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector >> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic >> -fasynchronous-unwind-tables -c base64.c -o base64.o >> In file included from base64.c:1: >> Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? >> base64.c: In function ?R_base64_decode?: >> base64.c:25: warning: pointer targets in assignment differ in signedness >> base64.c:39: warning: pointer targets in passing argument 1 of >> ?Rf_mkString? differ in signedness >> base64.c: In function ?R_base64_encode?: >> base64.c:60: warning: pointer targets in assignment differ in signedness >> make: *** [base64.o] Error 1 >> >> as far as i know i have all the necessary libraries installed: >> >> $ yum list installed | grep libxml >> libxml2.i386 2.6.31-1.fc7 >> installed libxml2-devel.i386 2.6.31-1.fc7 >> installed libxml2-python.i386 >> 2.6.31-1.fc7 installed perl-libxml-perl.noarch >> 0.08-1.2.1 installed >> $ yum list installed | grep curl >> curl.i386 7.16.4-1.fc7 >> installed curl-devel.i386 7.16.4-1.fc7 >> installed python-pycurl.i386 >> 7.16.0-0.1.20061207.fc installed >> >> as i am not an expert in linux stuff, i was wondering if there >> could be any other missing libraries? any other ideas? >> >> cheers >> martin >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: >> http://news.gmane.org/gmane.science.biology.informatics.conductor >> > > -- > Robert Gentleman, PhD > Program in Computational Biology > Division of Public Health Sciences > Fred Hutchinson Cancer Research Center > 1100 Fairview Ave. N, M2-B876 > PO Box 19024 > Seattle, Washington 98109-1024 > 206-667-7700 > rgentlem at fhcrc.org >
ADD REPLYlink written 11.1 years ago by Emmanuel Levy270
Hi Emmanual, Emmanuel Levy wrote: > Dear Robert, > >> That depends a bit on the organism you are wanting to use. For those that >> are supported by the org.xx.yy.db packages, such as human, >> org.Hs.eg >> >> there are maps in those annotation packages >> [9] "org.Hs.egENSEMBL2EG" "org.Hs.egENSEMBLPROT" >> [11] "org.Hs.egENSEMBLPROT2EG" "org.Hs.egENSEMBLTRANS" >> [13] "org.Hs.egENSEMBLTRANS2EG" "org.Hs.egENZYME" >> > > Thank you for your reply, I indeed want to annotate human IDs, so the > org.Hs.eg.db package looks good! > > However the help I could find on this package is limited. I understood > from the following page: > http://gaggle.systemsbiology.net/svn/gaggle/PIPE2.0/trunk/PIPEletRes ourceDir/GOTableEnrichment/GOEnrichmentScript.R > That seems like an odd place to look for help on Bioconductor packages (usually the URL would start a bit more like www.bioconductor.org). There are manual pages, vignettes and in the case of annotation packages, some discussion in books [either http://www.bioconductor.org/pub/RBioinf/ http://www.bioconductor.org/pub/biocases/ would be of some use]. > That "org.Hs.eg.db" can directly be given as the annotation package, > but then the IDs should be converted to EntrezIDs. For our packages the GO mappings are currently all in terms of EG. That might change to be based on some sort of protein ID, but not soon, and certainly not until that level of resolution is fairly commonly available. > It took me some time to figure it out, but I guess that now I've got > to familiarize myself with: > http://www.cse.unsw.edu.au/~mike/myrlibrary/AnnotationDbi/html/Bimap .html again - a very odd way to find out about Bioconductor packages. that page is available as ?Bimap > > One question though, how to list the annotation packages as you did above? >> help.search("org.Hs.eg.db") > or >> org.Hs.eg.db() > library(org.Hs.eg.db) ls(2) #as one variant (and if it is not in position 2 on the search path, then use search to find out where it is, or use some of the many options to ls to get the behavior you want) > didn't help. > > Finally, I googled for the keywords "GOstats and biomart" and did not > find any page that shows how to use them together. (In fact my post > from yesterday appears in 3rd position!) > Is it so straightforward to use them together and I'm being slow? Or > are they incompatible? They are not incompatible, but as I said in my previous email, the issue of how to determine the universe is not simple. best wishes Robert > > Thanks again for your help! > > Best wishes, > > Emmanuel > > >>> Though I have problems installing biomaRt, which I reported to the R >>> mailing list, I was wondering how to use GOstats with biomaRt, i.e., >>> what should be specified for the "annotation package"? >> I think that that discussion suggested an upgrade of R (which you will need >> for the tools I have described as well). >> >> best wishes >> Robert >> >>> Also, I was wondering if by any chance, somebody could think of a way >>> around biomaRt if I can't manage to install it. >>> >>> Many thanks for your help, >>> >>> Best wishes, >>> >>> Emmanuel >>> >>> >>> ========================================== >>> Email sent to the R mailing list: >>> >>> Subject: RCurl compilation error on ubuntu hardy >>> >>> Dear list members, >>> >>> I encountered this problem and the solution pointed out in a previous >>> thread did not work for me. >>> (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") >>> >>> I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. >>> >>> I really need RCurl in order to use biomaRt ... any help would be >>> greatly appreciated. >>> >>> Best wishes, >>> >>> Emmanuel >>> >>> ================================================= >>> >>>> sessionInfo() >>> R version 2.6.2 (2008-02-08) >>> x86_64-pc-linux-gnu >>> >>> locale: >>> >>> LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE=e n_CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=en _CA.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA.U TF-8;LC_IDENTIFICATION=C >>> >>> attached base packages: >>> [1] stats graphics grDevices utils datasets methods base >>> >>> loaded via a namespace (and not attached): >>> [1] rcompgen_0.1-17 tools_2.6.2 >>> >>> ================================================= >>> >>> >>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>> Warning in install.packages("RCurl", repos = "http://www.omegahat.org/R") >>> : >>> argument 'lib' is missing: using '/usr/local/lib/R/site-library' >>> trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' >>> Content type 'application/x-gzip' length 150884 bytes (147 Kb) >>> opened URL >>> ================================================== >>> downloaded 147 Kb >>> >>> * Installing *source* package 'RCurl' ... >>> checking for curl-config... /usr/bin/curl-config >>> checking for gcc... gcc >>> checking for C compiler default output file name... a.out >>> checking whether the C compiler works... yes >>> checking whether we are cross compiling... no >>> checking for suffix of executables... >>> checking for suffix of object files... o >>> checking whether we are using the GNU C compiler... yes >>> checking whether gcc accepts -g... yes >>> checking for gcc option to accept ANSI C... none needed >>> checking how to run the C preprocessor... gcc -E >>> Version has a libidn field >>> configure: creating ./config.status >>> config.status: creating src/Makevars >>> ** libs >>> gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include >>> -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o >>> In file included from base64.c:1: >>> Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' >>> make: *** [base64.o] Error 1 >>> chmod: cannot access `/usr/local/lib/R/site-library/RCurl/libs/*': No >>> such file or directory >>> ERROR: compilation failed for package 'RCurl' >>> ** Removing '/usr/local/lib/R/site-library/RCurl' >>> >>> The downloaded packages are in >>> /tmp/RtmpQ8FMBZ/downloaded_packages >>> Warning message: >>> In install.packages("RCurl", repos = "http://www.omegahat.org/R") : >>> installation of package 'RCurl' had non-zero exit status >>> >>> >>> ================================================================== ============== >>> >>> Hi Martin, >>> are you working on a 64-bit linux distribution and which version of >>> RCurl are you trying to install? There has been a problem with a >>> recent version of RCurl and the "R_base64_decode", search the archives >>> of the Bioconductor mailing list for a thread called >>> "RCurl loading problem with 64 bit linux distribution". >>> Please try using the newest versions of R (R-2.7.0 has been released a >>> few weeks ago) and RCurl, which you can obtain from within R by >>> typing: >>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>> The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 >>> and 0.9.1 did not. >>> Hope this helps. >>> Joern >>> >>> >>> martin sikora wrote: >>> >>> dear list members, >>> >>> i'm having a problem installing the biomaRt package on my linux >>> machine, due to the fact of a compilation error with RCurl. i am using >>> R 2.6.2 on fedora 7, and this is the output i get: >>> >>> gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R >>> -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe >>> -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector >>> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic >>> -fasynchronous-unwind-tables -c base64.c -o base64.o >>> In file included from base64.c:1: >>> Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? >>> base64.c: In function ?R_base64_decode?: >>> base64.c:25: warning: pointer targets in assignment differ in signedness >>> base64.c:39: warning: pointer targets in passing argument 1 of >>> ?Rf_mkString? differ in signedness >>> base64.c: In function ?R_base64_encode?: >>> base64.c:60: warning: pointer targets in assignment differ in signedness >>> make: *** [base64.o] Error 1 >>> >>> as far as i know i have all the necessary libraries installed: >>> >>> $ yum list installed | grep libxml >>> libxml2.i386 2.6.31-1.fc7 >>> installed libxml2-devel.i386 2.6.31-1.fc7 >>> installed libxml2-python.i386 >>> 2.6.31-1.fc7 installed perl-libxml-perl.noarch >>> 0.08-1.2.1 installed >>> $ yum list installed | grep curl >>> curl.i386 7.16.4-1.fc7 >>> installed curl-devel.i386 7.16.4-1.fc7 >>> installed python-pycurl.i386 >>> 7.16.0-0.1.20061207.fc installed >>> >>> as i am not an expert in linux stuff, i was wondering if there >>> could be any other missing libraries? any other ideas? >>> >>> cheers >>> martin >>> >>> _______________________________________________ >>> Bioconductor mailing list >>> Bioconductor at stat.math.ethz.ch >>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>> Search the archives: >>> http://news.gmane.org/gmane.science.biology.informatics.conductor >>> >> -- >> Robert Gentleman, PhD >> Program in Computational Biology >> Division of Public Health Sciences >> Fred Hutchinson Cancer Research Center >> 1100 Fairview Ave. N, M2-B876 >> PO Box 19024 >> Seattle, Washington 98109-1024 >> 206-667-7700 >> rgentlem at fhcrc.org >> > -- Robert Gentleman, PhD Program in Computational Biology Division of Public Health Sciences Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N, M2-B876 PO Box 19024 Seattle, Washington 98109-1024 206-667-7700 rgentlem at fhcrc.org
ADD REPLYlink written 11.1 years ago by rgentleman5.5k
Dear Robert, Thank you for your reply. > That seems like an odd place to look for help on Bioconductor packages > (usually the URL would start a bit more like www.bioconductor.org). I agree, yet if you type in google: site:www.bioconductor.org gostats org.Hs.eg.db It seems that there is no example on how to use it. > library(org.Hs.eg.db) > ls(2) #as one variant Great thanks! I didn't known that trick. >> Finally, I googled for the keywords "GOstats and biomart" and did not >> find any page that shows how to use them together. (In fact my post >> from yesterday appears in 3rd position!) >> Is it so straightforward to use them together and I'm being slow? Or >> are they incompatible? > > They are not incompatible, but as I said in my previous email, the issue of > how to determine the universe is not simple. In my case, to determine the universe is OK (or so I think): I am looking at a particular property among all proteins with a charaterized phosphorilation site (which is my universe). So I've got two lists of IDs, one of the universe and one of a subset of proteins with a particular trait. However I'm just not sure which parameter to give for the annotation package. Any hint would be greatly appreciated! Many thanks, Emmanuel > > best wishes > Robert > >> >> Thanks again for your help! >> >> Best wishes, >> >> Emmanuel >> >> >>>> Though I have problems installing biomaRt, which I reported to the R >>>> mailing list, I was wondering how to use GOstats with biomaRt, i.e., >>>> what should be specified for the "annotation package"? >>> >>> I think that that discussion suggested an upgrade of R (which you will >>> need >>> for the tools I have described as well). >>> >>> best wishes >>> Robert >>> >>>> Also, I was wondering if by any chance, somebody could think of a way >>>> around biomaRt if I can't manage to install it. >>>> >>>> Many thanks for your help, >>>> >>>> Best wishes, >>>> >>>> Emmanuel >>>> >>>> >>>> ========================================== >>>> Email sent to the R mailing list: >>>> >>>> Subject: RCurl compilation error on ubuntu hardy >>>> >>>> Dear list members, >>>> >>>> I encountered this problem and the solution pointed out in a previous >>>> thread did not work for me. >>>> (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>> >>>> I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. >>>> >>>> I really need RCurl in order to use biomaRt ... any help would be >>>> greatly appreciated. >>>> >>>> Best wishes, >>>> >>>> Emmanuel >>>> >>>> ================================================= >>>> >>>>> sessionInfo() >>>> >>>> R version 2.6.2 (2008-02-08) >>>> x86_64-pc-linux-gnu >>>> >>>> locale: >>>> >>>> >>>> LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE= en_CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER=e n_CA.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA. UTF-8;LC_IDENTIFICATION=C >>>> >>>> attached base packages: >>>> [1] stats graphics grDevices utils datasets methods base >>>> >>>> loaded via a namespace (and not attached): >>>> [1] rcompgen_0.1-17 tools_2.6.2 >>>> >>>> ================================================= >>>> >>>> >>>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>> >>>> Warning in install.packages("RCurl", repos = >>>> "http://www.omegahat.org/R") >>>> : >>>> argument 'lib' is missing: using '/usr/local/lib/R/site-library' >>>> trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' >>>> Content type 'application/x-gzip' length 150884 bytes (147 Kb) >>>> opened URL >>>> ================================================== >>>> downloaded 147 Kb >>>> >>>> * Installing *source* package 'RCurl' ... >>>> checking for curl-config... /usr/bin/curl-config >>>> checking for gcc... gcc >>>> checking for C compiler default output file name... a.out >>>> checking whether the C compiler works... yes >>>> checking whether we are cross compiling... no >>>> checking for suffix of executables... >>>> checking for suffix of object files... o >>>> checking whether we are using the GNU C compiler... yes >>>> checking whether gcc accepts -g... yes >>>> checking for gcc option to accept ANSI C... none needed >>>> checking how to run the C preprocessor... gcc -E >>>> Version has a libidn field >>>> configure: creating ./config.status >>>> config.status: creating src/Makevars >>>> ** libs >>>> gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include >>>> -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o >>>> In file included from base64.c:1: >>>> Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' >>>> make: *** [base64.o] Error 1 >>>> chmod: cannot access `/usr/local/lib/R/site- library/RCurl/libs/*': No >>>> such file or directory >>>> ERROR: compilation failed for package 'RCurl' >>>> ** Removing '/usr/local/lib/R/site-library/RCurl' >>>> >>>> The downloaded packages are in >>>> /tmp/RtmpQ8FMBZ/downloaded_packages >>>> Warning message: >>>> In install.packages("RCurl", repos = "http://www.omegahat.org/R") : >>>> installation of package 'RCurl' had non-zero exit status >>>> >>>> >>>> >>>> ================================================================= =============== >>>> >>>> Hi Martin, >>>> are you working on a 64-bit linux distribution and which version of >>>> RCurl are you trying to install? There has been a problem with a >>>> recent version of RCurl and the "R_base64_decode", search the archives >>>> of the Bioconductor mailing list for a thread called >>>> "RCurl loading problem with 64 bit linux distribution". >>>> Please try using the newest versions of R (R-2.7.0 has been released a >>>> few weeks ago) and RCurl, which you can obtain from within R by >>>> typing: >>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>> The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 >>>> and 0.9.1 did not. >>>> Hope this helps. >>>> Joern >>>> >>>> >>>> martin sikora wrote: >>>> >>>> dear list members, >>>> >>>> i'm having a problem installing the biomaRt package on my linux >>>> machine, due to the fact of a compilation error with RCurl. i am using >>>> R 2.6.2 on fedora 7, and this is the output i get: >>>> >>>> gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R >>>> -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe >>>> -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector >>>> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic >>>> -fasynchronous-unwind-tables -c base64.c -o base64.o >>>> In file included from base64.c:1: >>>> Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? >>>> base64.c: In function ?R_base64_decode?: >>>> base64.c:25: warning: pointer targets in assignment differ in >>>> signedness >>>> base64.c:39: warning: pointer targets in passing argument 1 of >>>> ?Rf_mkString? differ in signedness >>>> base64.c: In function ?R_base64_encode?: >>>> base64.c:60: warning: pointer targets in assignment differ in >>>> signedness >>>> make: *** [base64.o] Error 1 >>>> >>>> as far as i know i have all the necessary libraries installed: >>>> >>>> $ yum list installed | grep libxml >>>> libxml2.i386 2.6.31-1.fc7 >>>> installed libxml2-devel.i386 2.6.31-1.fc7 >>>> installed libxml2-python.i386 >>>> 2.6.31-1.fc7 installed perl-libxml-perl.noarch >>>> 0.08-1.2.1 installed >>>> $ yum list installed | grep curl >>>> curl.i386 7.16.4-1.fc7 >>>> installed curl-devel.i386 7.16.4-1.fc7 >>>> installed python-pycurl.i386 >>>> 7.16.0-0.1.20061207.fc installed >>>> >>>> as i am not an expert in linux stuff, i was wondering if there >>>> could be any other missing libraries? any other ideas? >>>> >>>> cheers >>>> martin >>>> >>>> _______________________________________________ >>>> Bioconductor mailing list >>>> Bioconductor at stat.math.ethz.ch >>>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>>> Search the archives: >>>> http://news.gmane.org/gmane.science.biology.informatics.conductor >>>> >>> -- >>> Robert Gentleman, PhD >>> Program in Computational Biology >>> Division of Public Health Sciences >>> Fred Hutchinson Cancer Research Center >>> 1100 Fairview Ave. N, M2-B876 >>> PO Box 19024 >>> Seattle, Washington 98109-1024 >>> 206-667-7700 >>> rgentlem at fhcrc.org >>> >> > > -- > Robert Gentleman, PhD > Program in Computational Biology > Division of Public Health Sciences > Fred Hutchinson Cancer Research Center > 1100 Fairview Ave. N, M2-B876 > PO Box 19024 > Seattle, Washington 98109-1024 > 206-667-7700 > rgentlem at fhcrc.org >
ADD REPLYlink written 11.1 years ago by Emmanuel Levy270
Emmanuel Levy wrote: > Dear Robert, > > Thank you for your reply. > >> That seems like an odd place to look for help on Bioconductor packages >> (usually the URL would start a bit more like www.bioconductor.org). > > I agree, yet if you type in google: > site:www.bioconductor.org gostats org.Hs.eg.db Well, I guess my point was that google is not a particularly useful tool for finding documentation for Bioconductor (or indeed most R) packages. They have documentation that comes with them, and that should be the first place you look. > > It seems that there is no example on how to use it. > >> library(org.Hs.eg.db) >> ls(2) #as one variant > > Great thanks! I didn't known that trick. > >>> Finally, I googled for the keywords "GOstats and biomart" and did not >>> find any page that shows how to use them together. (In fact my post >>> from yesterday appears in 3rd position!) >>> Is it so straightforward to use them together and I'm being slow? Or >>> are they incompatible? >> They are not incompatible, but as I said in my previous email, the issue of >> how to determine the universe is not simple. > > In my case, to determine the universe is OK (or so I think): I am > looking at a particular property among all proteins with a > charaterized phosphorilation site (which is my universe). So I've got > two lists of IDs, one of the universe and one of a subset of proteins > with a particular trait. However I'm just not sure which parameter to > give for the annotation package. > > Any hint would be greatly appreciated! > > Many thanks, > > Emmanuel > > > >> best wishes >> Robert >> >>> Thanks again for your help! >>> >>> Best wishes, >>> >>> Emmanuel >>> >>> >>>>> Though I have problems installing biomaRt, which I reported to the R >>>>> mailing list, I was wondering how to use GOstats with biomaRt, i.e., >>>>> what should be specified for the "annotation package"? >>>> I think that that discussion suggested an upgrade of R (which you will >>>> need >>>> for the tools I have described as well). >>>> >>>> best wishes >>>> Robert >>>> >>>>> Also, I was wondering if by any chance, somebody could think of a way >>>>> around biomaRt if I can't manage to install it. >>>>> >>>>> Many thanks for your help, >>>>> >>>>> Best wishes, >>>>> >>>>> Emmanuel >>>>> >>>>> >>>>> ========================================== >>>>> Email sent to the R mailing list: >>>>> >>>>> Subject: RCurl compilation error on ubuntu hardy >>>>> >>>>> Dear list members, >>>>> >>>>> I encountered this problem and the solution pointed out in a previous >>>>> thread did not work for me. >>>>> (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>>> >>>>> I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. >>>>> >>>>> I really need RCurl in order to use biomaRt ... any help would be >>>>> greatly appreciated. >>>>> >>>>> Best wishes, >>>>> >>>>> Emmanuel >>>>> >>>>> ================================================= >>>>> >>>>>> sessionInfo() >>>>> R version 2.6.2 (2008-02-08) >>>>> x86_64-pc-linux-gnu >>>>> >>>>> locale: >>>>> >>>>> >>>>> LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLATE =en_CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER= en_CA.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_CA .UTF-8;LC_IDENTIFICATION=C >>>>> >>>>> attached base packages: >>>>> [1] stats graphics grDevices utils datasets methods base >>>>> >>>>> loaded via a namespace (and not attached): >>>>> [1] rcompgen_0.1-17 tools_2.6.2 >>>>> >>>>> ================================================= >>>>> >>>>> >>>>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>>> Warning in install.packages("RCurl", repos = >>>>> "http://www.omegahat.org/R") >>>>> : >>>>> argument 'lib' is missing: using '/usr/local/lib/R/site- library' >>>>> trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' >>>>> Content type 'application/x-gzip' length 150884 bytes (147 Kb) >>>>> opened URL >>>>> ================================================== >>>>> downloaded 147 Kb >>>>> >>>>> * Installing *source* package 'RCurl' ... >>>>> checking for curl-config... /usr/bin/curl-config >>>>> checking for gcc... gcc >>>>> checking for C compiler default output file name... a.out >>>>> checking whether the C compiler works... yes >>>>> checking whether we are cross compiling... no >>>>> checking for suffix of executables... >>>>> checking for suffix of object files... o >>>>> checking whether we are using the GNU C compiler... yes >>>>> checking whether gcc accepts -g... yes >>>>> checking for gcc option to accept ANSI C... none needed >>>>> checking how to run the C preprocessor... gcc -E >>>>> Version has a libidn field >>>>> configure: creating ./config.status >>>>> config.status: creating src/Makevars >>>>> ** libs >>>>> gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include >>>>> -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o >>>>> In file included from base64.c:1: >>>>> Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' >>>>> make: *** [base64.o] Error 1 >>>>> chmod: cannot access `/usr/local/lib/R/site- library/RCurl/libs/*': No >>>>> such file or directory >>>>> ERROR: compilation failed for package 'RCurl' >>>>> ** Removing '/usr/local/lib/R/site-library/RCurl' >>>>> >>>>> The downloaded packages are in >>>>> /tmp/RtmpQ8FMBZ/downloaded_packages >>>>> Warning message: >>>>> In install.packages("RCurl", repos = "http://www.omegahat.org/R") : >>>>> installation of package 'RCurl' had non-zero exit status >>>>> >>>>> >>>>> >>>>> ================================================================ ================ >>>>> >>>>> Hi Martin, >>>>> are you working on a 64-bit linux distribution and which version of >>>>> RCurl are you trying to install? There has been a problem with a >>>>> recent version of RCurl and the "R_base64_decode", search the archives >>>>> of the Bioconductor mailing list for a thread called >>>>> "RCurl loading problem with 64 bit linux distribution". >>>>> Please try using the newest versions of R (R-2.7.0 has been released a >>>>> few weeks ago) and RCurl, which you can obtain from within R by >>>>> typing: >>>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>>> The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 >>>>> and 0.9.1 did not. >>>>> Hope this helps. >>>>> Joern >>>>> >>>>> >>>>> martin sikora wrote: >>>>> >>>>> dear list members, >>>>> >>>>> i'm having a problem installing the biomaRt package on my linux >>>>> machine, due to the fact of a compilation error with RCurl. i am using >>>>> R 2.6.2 on fedora 7, and this is the output i get: >>>>> >>>>> gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R >>>>> -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe >>>>> -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector >>>>> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic >>>>> -fasynchronous-unwind-tables -c base64.c -o base64.o >>>>> In file included from base64.c:1: >>>>> Rcurl.h:52: error: expected specifier-qualifier-list before ?cetype_t? >>>>> base64.c: In function ?R_base64_decode?: >>>>> base64.c:25: warning: pointer targets in assignment differ in >>>>> signedness >>>>> base64.c:39: warning: pointer targets in passing argument 1 of >>>>> ?Rf_mkString? differ in signedness >>>>> base64.c: In function ?R_base64_encode?: >>>>> base64.c:60: warning: pointer targets in assignment differ in >>>>> signedness >>>>> make: *** [base64.o] Error 1 >>>>> >>>>> as far as i know i have all the necessary libraries installed: >>>>> >>>>> $ yum list installed | grep libxml >>>>> libxml2.i386 2.6.31-1.fc7 >>>>> installed libxml2-devel.i386 2.6.31-1.fc7 >>>>> installed libxml2-python.i386 >>>>> 2.6.31-1.fc7 installed perl-libxml-perl.noarch >>>>> 0.08-1.2.1 installed >>>>> $ yum list installed | grep curl >>>>> curl.i386 7.16.4-1.fc7 >>>>> installed curl-devel.i386 7.16.4-1.fc7 >>>>> installed python-pycurl.i386 >>>>> 7.16.0-0.1.20061207.fc installed >>>>> >>>>> as i am not an expert in linux stuff, i was wondering if there >>>>> could be any other missing libraries? any other ideas? >>>>> >>>>> cheers >>>>> martin >>>>> >>>>> _______________________________________________ >>>>> Bioconductor mailing list >>>>> Bioconductor at stat.math.ethz.ch >>>>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>>>> Search the archives: >>>>> http://news.gmane.org/gmane.science.biology.informatics.conductor >>>>> >>>> -- >>>> Robert Gentleman, PhD >>>> Program in Computational Biology >>>> Division of Public Health Sciences >>>> Fred Hutchinson Cancer Research Center >>>> 1100 Fairview Ave. N, M2-B876 >>>> PO Box 19024 >>>> Seattle, Washington 98109-1024 >>>> 206-667-7700 >>>> rgentlem at fhcrc.org >>>> >> -- >> Robert Gentleman, PhD >> Program in Computational Biology >> Division of Public Health Sciences >> Fred Hutchinson Cancer Research Center >> 1100 Fairview Ave. N, M2-B876 >> PO Box 19024 >> Seattle, Washington 98109-1024 >> 206-667-7700 >> rgentlem at fhcrc.org >> > -- Robert Gentleman, PhD Program in Computational Biology Division of Public Health Sciences Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N, M2-B876 PO Box 19024 Seattle, Washington 98109-1024 206-667-7700 rgentlem at fhcrc.org
ADD REPLYlink written 11.1 years ago by rgentleman5.5k
Dear Robert, >> I agree, yet if you type in google: >> site:www.bioconductor.org gostats org.Hs.eg.db > > Well, I guess my point was that google is not a particularly useful tool > for finding documentation for Bioconductor (or indeed most R) packages. They > have documentation that comes with them, and that should be the first place > you look. Yes - I unfortunately came to this conclusion several times but I guess I'm too conditioned now. >> In my case, to determine the universe is OK (or so I think): I am >> looking at a particular property among all proteins with a >> charaterized phosphorilation site (which is my universe). So I've got >> two lists of IDs, one of the universe and one of a subset of proteins >> with a particular trait. However I'm just not sure which parameter to >> give for the annotation package. Sorry for asking the same question again, would it be that stupid? Do I have to create an environment myself that maps human IDs to GO IDs, in a similar way as it is done in the YEAST environment? Many thanks, Emmanuel >> >> Any hint would be greatly appreciated! >> >> Many thanks, >> >> Emmanuel >> >> >> >>> best wishes >>> Robert >>> >>>> Thanks again for your help! >>>> >>>> Best wishes, >>>> >>>> Emmanuel >>>> >>>> >>>>>> Though I have problems installing biomaRt, which I reported to the R >>>>>> mailing list, I was wondering how to use GOstats with biomaRt, i.e., >>>>>> what should be specified for the "annotation package"? >>>>> >>>>> I think that that discussion suggested an upgrade of R (which you will >>>>> need >>>>> for the tools I have described as well). >>>>> >>>>> best wishes >>>>> Robert >>>>> >>>>>> Also, I was wondering if by any chance, somebody could think of a way >>>>>> around biomaRt if I can't manage to install it. >>>>>> >>>>>> Many thanks for your help, >>>>>> >>>>>> Best wishes, >>>>>> >>>>>> Emmanuel >>>>>> >>>>>> >>>>>> ========================================== >>>>>> Email sent to the R mailing list: >>>>>> >>>>>> Subject: RCurl compilation error on ubuntu hardy >>>>>> >>>>>> Dear list members, >>>>>> >>>>>> I encountered this problem and the solution pointed out in a previous >>>>>> thread did not work for me. >>>>>> (e.g. install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>>>> >>>>>> I work with Ubuntu Hardy, and installed R 2.6.2 via apt-get. >>>>>> >>>>>> I really need RCurl in order to use biomaRt ... any help would be >>>>>> greatly appreciated. >>>>>> >>>>>> Best wishes, >>>>>> >>>>>> Emmanuel >>>>>> >>>>>> ================================================= >>>>>> >>>>>>> sessionInfo() >>>>>> >>>>>> R version 2.6.2 (2008-02-08) >>>>>> x86_64-pc-linux-gnu >>>>>> >>>>>> locale: >>>>>> >>>>>> >>>>>> >>>>>> LC_CTYPE=en_CA.UTF-8;LC_NUMERIC=C;LC_TIME=en_CA.UTF-8;LC_COLLAT E=en_CA.UTF-8;LC_MONETARY=en_CA.UTF-8;LC_MESSAGES=en_CA.UTF-8;LC_PAPER =en_CA.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_C A.UTF-8;LC_IDENTIFICATION=C >>>>>> >>>>>> attached base packages: >>>>>> [1] stats graphics grDevices utils datasets methods base >>>>>> >>>>>> loaded via a namespace (and not attached): >>>>>> [1] rcompgen_0.1-17 tools_2.6.2 >>>>>> >>>>>> ================================================= >>>>>> >>>>>> >>>>>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>>>> >>>>>> Warning in install.packages("RCurl", repos = >>>>>> "http://www.omegahat.org/R") >>>>>> : >>>>>> argument 'lib' is missing: using '/usr/local/lib/R/site- library' >>>>>> trying URL 'http://www.omegahat.org/R/src/contrib/RCurl_0.9-4.tar.gz' >>>>>> Content type 'application/x-gzip' length 150884 bytes (147 Kb) >>>>>> opened URL >>>>>> ================================================== >>>>>> downloaded 147 Kb >>>>>> >>>>>> * Installing *source* package 'RCurl' ... >>>>>> checking for curl-config... /usr/bin/curl-config >>>>>> checking for gcc... gcc >>>>>> checking for C compiler default output file name... a.out >>>>>> checking whether the C compiler works... yes >>>>>> checking whether we are cross compiling... no >>>>>> checking for suffix of executables... >>>>>> checking for suffix of object files... o >>>>>> checking whether we are using the GNU C compiler... yes >>>>>> checking whether gcc accepts -g... yes >>>>>> checking for gcc option to accept ANSI C... none needed >>>>>> checking how to run the C preprocessor... gcc -E >>>>>> Version has a libidn field >>>>>> configure: creating ./config.status >>>>>> config.status: creating src/Makevars >>>>>> ** libs >>>>>> gcc -std=gnu99 -I/usr/share/R/include -I/usr/share/R/include >>>>>> -DHAVE_LIBIDN_FIELD=1 -fpic -g -O2 -c base64.c -o base64.o >>>>>> In file included from base64.c:1: >>>>>> Rcurl.h:52: error: expected specifier-qualifier-list before 'cetype_t' >>>>>> make: *** [base64.o] Error 1 >>>>>> chmod: cannot access `/usr/local/lib/R/site- library/RCurl/libs/*': No >>>>>> such file or directory >>>>>> ERROR: compilation failed for package 'RCurl' >>>>>> ** Removing '/usr/local/lib/R/site-library/RCurl' >>>>>> >>>>>> The downloaded packages are in >>>>>> /tmp/RtmpQ8FMBZ/downloaded_packages >>>>>> Warning message: >>>>>> In install.packages("RCurl", repos = "http://www.omegahat.org/R") : >>>>>> installation of package 'RCurl' had non-zero exit status >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> =============================================================== ================= >>>>>> >>>>>> Hi Martin, >>>>>> are you working on a 64-bit linux distribution and which version of >>>>>> RCurl are you trying to install? There has been a problem with a >>>>>> recent version of RCurl and the "R_base64_decode", search the archives >>>>>> of the Bioconductor mailing list for a thread called >>>>>> "RCurl loading problem with 64 bit linux distribution". >>>>>> Please try using the newest versions of R (R-2.7.0 has been released a >>>>>> few weeks ago) and RCurl, which you can obtain from within R by >>>>>> typing: >>>>>> install.packages("RCurl", repos = "http://www.omegahat.org/R") >>>>>> The new version of RCurl (>= 0.9.2) worked fine for me, while 0.9.0 >>>>>> and 0.9.1 did not. >>>>>> Hope this helps. >>>>>> Joern >>>>>> >>>>>> >>>>>> martin sikora wrote: >>>>>> >>>>>> dear list members, >>>>>> >>>>>> i'm having a problem installing the biomaRt package on my linux >>>>>> machine, due to the fact of a compilation error with RCurl. i am using >>>>>> R 2.6.2 on fedora 7, and this is the output i get: >>>>>> >>>>>> gcc -m32 -std=gnu99 -I/usr/include/R -I/usr/include/R >>>>>> -DHAVE_LIBIDN_FIELD=1 -I/usr/local/include -fpic -O2 -g -pipe >>>>>> -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector >>>>>> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic >>>>>> -fasynchronous-unwind-tables -c base64.c -o base64.o >>>>>> In file included from base64.c:1: >>>>>> Rcurl.h:52: error: expected specifier-qualifier-list before >>>>>> ?cetype_t? >>>>>> base64.c: In function ?R_base64_decode?: >>>>>> base64.c:25: warning: pointer targets in assignment differ in >>>>>> signedness >>>>>> base64.c:39: warning: pointer targets in passing argument 1 of >>>>>> ?Rf_mkString? differ in signedness >>>>>> base64.c: In function ?R_base64_encode?: >>>>>> base64.c:60: warning: pointer targets in assignment differ in >>>>>> signedness >>>>>> make: *** [base64.o] Error 1 >>>>>> >>>>>> as far as i know i have all the necessary libraries installed: >>>>>> >>>>>> $ yum list installed | grep libxml >>>>>> libxml2.i386 2.6.31-1.fc7 >>>>>> installed libxml2-devel.i386 2.6.31-1.fc7 >>>>>> installed libxml2-python.i386 >>>>>> 2.6.31-1.fc7 installed perl-libxml-perl.noarch >>>>>> 0.08-1.2.1 installed >>>>>> $ yum list installed | grep curl >>>>>> curl.i386 7.16.4-1.fc7 >>>>>> installed curl-devel.i386 7.16.4-1.fc7 >>>>>> installed python-pycurl.i386 >>>>>> 7.16.0-0.1.20061207.fc installed >>>>>> >>>>>> as i am not an expert in linux stuff, i was wondering if there >>>>>> could be any other missing libraries? any other ideas? >>>>>> >>>>>> cheers >>>>>> martin >>>>>> >>>>>> _______________________________________________ >>>>>> Bioconductor mailing list >>>>>> Bioconductor at stat.math.ethz.ch >>>>>> https://stat.ethz.ch/mailman/listinfo/bioconductor >>>>>> Search the archives: >>>>>> http://news.gmane.org/gmane.science.biology.informatics.conductor >>>>>> >>>>> -- >>>>> Robert Gentleman, PhD >>>>> Program in Computational Biology >>>>> Division of Public Health Sciences >>>>> Fred Hutchinson Cancer Research Center >>>>> 1100 Fairview Ave. N, M2-B876 >>>>> PO Box 19024 >>>>> Seattle, Washington 98109-1024 >>>>> 206-667-7700 >>>>> rgentlem at fhcrc.org >>>>> >>> -- >>> Robert Gentleman, PhD >>> Program in Computational Biology >>> Division of Public Health Sciences >>> Fred Hutchinson Cancer Research Center >>> 1100 Fairview Ave. N, M2-B876 >>> PO Box 19024 >>> Seattle, Washington 98109-1024 >>> 206-667-7700 >>> rgentlem at fhcrc.org >>> >> > > -- > Robert Gentleman, PhD > Program in Computational Biology > Division of Public Health Sciences > Fred Hutchinson Cancer Research Center > 1100 Fairview Ave. N, M2-B876 > PO Box 19024 > Seattle, Washington 98109-1024 > 206-667-7700 > rgentlem at fhcrc.org >
ADD REPLYlink written 11.1 years ago by Emmanuel Levy270
Please log in to add an answer.

Help
Access

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.
Powered by Biostar version 16.09
Traffic: 215 users visited in the last hour