problem with biocLite("Biobase") -- results in looping of download
2
0
Entering edit mode
@martin-morgan-1513
Last seen 4 months ago
United States
Hi Mark -- Mark Kimpel <mwkimpel at="" gmail.com=""> writes: > The code below results in a looping behavior with Biobase downloaded over > and over again until escaped, then each downloaded instance (all in > different temp folders) is installed. This behavior began about the time Weird! Does it help to start R --vanilla to avoid reading profile / etc information? What about unusual environment variables / symbolic links in the file system? Martin > that R-2.9.0 was released, but I had been using R-devel prior to that > without problem. My system is Debian Lenny AMD64. Output and sessionInfo() > follows below. > > source("http://www.bioconductor.org/biocLite.R") > biocLite("Biobase") > >> source("http://www.bioconductor.org/biocLite.R") > biocLite("Biobase") > source("http://www.bioconductor.org/biocLite.R") > Warning messages: > 1: In safeSource() : Redefining ?biocinstall? > 2: In safeSource() : Redefining ?biocinstallPkgGroups? > 3: In safeSource() : Redefining ?biocinstallRepos? >> biocLite("Biobase") > Running biocinstall version 2.4.10 with R version 2.9.0 > Your version of R requires version 2.4 of Bioconductor. > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > dependencies, : > argument 'lib' is missing: using '/home/mkimpel/R_HOME/site- library-2.9.0' > trying URL ' > http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2.4.1. tar.gz' > Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) > opened URL > ================================================== > downloaded 1.9 Mb > > Loading required package: utils > Running biocinstall version 2.4.10 with R version 2.9.0 > Your version of R requires version 2.4 of Bioconductor. > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > dependencies, : > argument 'lib' is missing: using '/home/mkimpel/R_HOME/site- library-2.9.0' > trying URL ' > http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2.4.1. tar.gz' > Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) > opened URL > ================================================== > ## REPEATS UNTIL ESCAPED > ================================================== > downloaded 1.9 Mb > > Loading required package: utils > Running biocinstall version 2.4.10 with R version 2.9.0 > Your version of R requires version 2.4 of Bioconductor. > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > dependencies, : > argument 'lib' is missing: using '/home/mkimpel/R_HOME/site- library-2.9.0' > C-c C-c > Execution halted > > The downloaded packages are in > ?/tmp/RtmpkGuMs0/downloaded_packages? > Warning message: > In install.packages(pkgs = pkgs, repos = repos, dependencies = > dependencies, : > installation of package 'Biobase' had non-zero exit status > * Installing *source* package ?Biobase? ... > ** libs > gcc -std=gnu99 -I/home/mkimpel/R_HOME/R > >> sessionInfo() > R version 2.9.0 (2009-04-17) > x86_64-unknown-linux-gnu > > locale: > LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE=en_ US.UTF-8;LC_MONETARY=C;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en_US.UTF-8;LC _NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.UTF-8;LC_IDEN TIFICATION=C > > attached base packages: > [1] stats graphics grDevices datasets utils methods base > > loaded via a namespace (and not attached): > [1] tools_2.9.0 > ------------------------------------------------------------ > Mark W. Kimpel MD ** Neuroinformatics ** Dept. of Psychiatry > Indiana University School of Medicine > > 15032 Hunter Court, Westfield, IN 46074 > > (317) 490-5129 Work, & Mobile & VoiceMail > (317) 399-1219 Home > Skype: mkimpel > > "The real problem is not whether machines think but whether men do." -- B. > F. Skinner > ****************************************************************** > > [[alternative HTML version deleted]] > > _______________________________________________ > Bioconductor mailing list > Bioconductor at stat.math.ethz.ch > https://stat.ethz.ch/mailman/listinfo/bioconductor > Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor -- Martin Morgan Computational Biology / Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N. PO Box 19024 Seattle, WA 98109 Location: Arnold Building M1 B861 Phone: (206) 667-2793
Cancer Biobase Cancer Biobase • 1.3k views
ADD COMMENT •
0
Entering edit mode
@cei-abreu-goodger-4433
Last seen 9.8 years ago
Mexico
Maybe related... (probably not, though) I had some problems with "looping" biocLite install errors, after a new R install. The R --vanilla didn't work, but what did work was to simply rename my ~/.Rprofile Apparently at some point during the install R is called to install packages, and at that point my .Rprofile was being loaded and it would complain that Biobase wasn't already installed. Cheers, Cei Martin Morgan wrote: > Hi Mark -- > > Mark Kimpel <mwkimpel at="" gmail.com=""> writes: > >> The code below results in a looping behavior with Biobase downloaded over >> and over again until escaped, then each downloaded instance (all in >> different temp folders) is installed. This behavior began about the time > > Weird! Does it help to start > > R --vanilla > > to avoid reading profile / etc information? What about unusual > environment variables / symbolic links in the file system? > > Martin > >> that R-2.9.0 was released, but I had been using R-devel prior to that >> without problem. My system is Debian Lenny AMD64. Output and sessionInfo() >> follows below. >> >> source("http://www.bioconductor.org/biocLite.R") >> biocLite("Biobase") >> >>> source("http://www.bioconductor.org/biocLite.R") >> biocLite("Biobase") >> source("http://www.bioconductor.org/biocLite.R") >> Warning messages: >> 1: In safeSource() : Redefining ?biocinstall? >> 2: In safeSource() : Redefining ?biocinstallPkgGroups? >> 3: In safeSource() : Redefining ?biocinstallRepos? >>> biocLite("Biobase") >> Running biocinstall version 2.4.10 with R version 2.9.0 >> Your version of R requires version 2.4 of Bioconductor. >> Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = >> dependencies, : >> argument 'lib' is missing: using '/home/mkimpel/R_HOME/site- library-2.9.0' >> trying URL ' >> http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2.4.1 .tar.gz' >> Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) >> opened URL >> ================================================== >> downloaded 1.9 Mb >> >> Loading required package: utils >> Running biocinstall version 2.4.10 with R version 2.9.0 >> Your version of R requires version 2.4 of Bioconductor. >> Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = >> dependencies, : >> argument 'lib' is missing: using '/home/mkimpel/R_HOME/site- library-2.9.0' >> trying URL ' >> http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2.4.1 .tar.gz' >> Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) >> opened URL >> ================================================== >> ## REPEATS UNTIL ESCAPED >> ================================================== >> downloaded 1.9 Mb >> >> Loading required package: utils >> Running biocinstall version 2.4.10 with R version 2.9.0 >> Your version of R requires version 2.4 of Bioconductor. >> Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = >> dependencies, : >> argument 'lib' is missing: using '/home/mkimpel/R_HOME/site- library-2.9.0' >> C-c C-c >> Execution halted >> >> The downloaded packages are in >> ?/tmp/RtmpkGuMs0/downloaded_packages? >> Warning message: >> In install.packages(pkgs = pkgs, repos = repos, dependencies = >> dependencies, : >> installation of package 'Biobase' had non-zero exit status >> * Installing *source* package ?Biobase? ... >> ** libs >> gcc -std=gnu99 -I/home/mkimpel/R_HOME/R >> >>> sessionInfo() >> R version 2.9.0 (2009-04-17) >> x86_64-unknown-linux-gnu >> >> locale: >> LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE=en _US.UTF-8;LC_MONETARY=C;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en_US.UTF-8;L C_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.UTF-8;LC_IDE NTIFICATION=C >> >> attached base packages: >> [1] stats graphics grDevices datasets utils methods base >> >> loaded via a namespace (and not attached): >> [1] tools_2.9.0 >> ------------------------------------------------------------ >> Mark W. Kimpel MD ** Neuroinformatics ** Dept. of Psychiatry >> Indiana University School of Medicine >> >> 15032 Hunter Court, Westfield, IN 46074 >> >> (317) 490-5129 Work, & Mobile & VoiceMail >> (317) 399-1219 Home >> Skype: mkimpel >> >> "The real problem is not whether machines think but whether men do." -- B. >> F. Skinner >> ****************************************************************** >> >> [[alternative HTML version deleted]] >> >> _______________________________________________ >> Bioconductor mailing list >> Bioconductor at stat.math.ethz.ch >> https://stat.ethz.ch/mailman/listinfo/bioconductor >> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor >
ADD COMMENT •
0
Entering edit mode
Mark W Kimpel ▴ 830
@mark-w-kimpel-2027
Last seen 10.3 years ago
Sorry took me a bit to get to this, was out of the office yesterday. The problem seems to only occur if I try to execute biocLite("Biobase") from within my .Rprofile OR if I have tried and failed with this, escaped, and then retry without rebooting R. If I completely leave it out of my .Rprofile it will run normally from within R. This is definitely new behavior as this has worked well for me for over a year. It actually doesn't run every time, it is actually wrapped in a function so that it only runs once a week (which I stripped out for diagnostic purposes, that wrapper is not the problem). It seems like something internal to R or biocLite has changed, any idea what it could be? Mark ------------------------------------------------------------ Mark W. Kimpel MD ** Neuroinformatics ** Dept. of Psychiatry Indiana University School of Medicine 15032 Hunter Court, Westfield, IN 46074 (317) 490-5129 Work, & Mobile & VoiceMail (317) 399-1219 Home Skype: mkimpel "The real problem is not whether machines think but whether men do." -- B. F. Skinner ****************************************************************** On Mon, May 18, 2009 at 10:48 PM, Martin Morgan <mtmorgan@fhcrc.org> wrote: > Hi Mark -- > > Mark Kimpel <mwkimpel@gmail.com> writes: > > > The code below results in a looping behavior with Biobase downloaded over > > and over again until escaped, then each downloaded instance (all in > > different temp folders) is installed. This behavior began about the time > > Weird! Does it help to start > > R --vanilla > > to avoid reading profile / etc information? What about unusual > environment variables / symbolic links in the file system? > > Martin > > > that R-2.9.0 was released, but I had been using R-devel prior to that > > without problem. My system is Debian Lenny AMD64. Output and > sessionInfo() > > follows below. > > > > source("http://www.bioconductor.org/biocLite.R") > > biocLite("Biobase") > > > >> source("http://www.bioconductor.org/biocLite.R") > > biocLite("Biobase") > > source("http://www.bioconductor.org/biocLite.R") > > Warning messages: > > 1: In safeSource() : Redefining ‘biocinstall’ > > 2: In safeSource() : Redefining ‘biocinstallPkgGroups’ > > 3: In safeSource() : Redefining ‘biocinstallRepos’ > >> biocLite("Biobase") > > Running biocinstall version 2.4.10 with R version 2.9.0 > > Your version of R requires version 2.4 of Bioconductor. > > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > argument 'lib' is missing: using > '/home/mkimpel/R_HOME/site-library-2.9.0' > > trying URL ' > > > http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2.4.1. tar.gz > ' > > Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) > > opened URL > > ================================================== > > downloaded 1.9 Mb > > > > Loading required package: utils > > Running biocinstall version 2.4.10 with R version 2.9.0 > > Your version of R requires version 2.4 of Bioconductor. > > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > argument 'lib' is missing: using > '/home/mkimpel/R_HOME/site-library-2.9.0' > > trying URL ' > > > http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2.4.1. tar.gz > ' > > Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) > > opened URL > > ================================================== > > ## REPEATS UNTIL ESCAPED > > ================================================== > > downloaded 1.9 Mb > > > > Loading required package: utils > > Running biocinstall version 2.4.10 with R version 2.9.0 > > Your version of R requires version 2.4 of Bioconductor. > > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > argument 'lib' is missing: using > '/home/mkimpel/R_HOME/site-library-2.9.0' > > C-c C-c > > Execution halted > > > > The downloaded packages are in > > ‘/tmp/RtmpkGuMs0/downloaded_packages’ > > Warning message: > > In install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > installation of package 'Biobase' had non-zero exit status > > * Installing *source* package ‘Biobase’ ... > > ** libs > > gcc -std=gnu99 -I/home/mkimpel/R_HOME/R > > > >> sessionInfo() > > R version 2.9.0 (2009-04-17) > > x86_64-unknown-linux-gnu > > > > locale: > > > LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE=en_ US.UTF-8;LC_MONETARY=C;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en_US.UTF-8;LC _NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.UTF-8;LC_IDEN TIFICATION=C > > > > attached base packages: > > [1] stats graphics grDevices datasets utils methods base > > > > loaded via a namespace (and not attached): > > [1] tools_2.9.0 > > ------------------------------------------------------------ > > Mark W. Kimpel MD ** Neuroinformatics ** Dept. of Psychiatry > > Indiana University School of Medicine > > > > 15032 Hunter Court, Westfield, IN 46074 > > > > (317) 490-5129 Work, & Mobile & VoiceMail > > (317) 399-1219 Home > > Skype: mkimpel > > > > "The real problem is not whether machines think but whether men do." -- > B. > > F. Skinner > > ****************************************************************** > > > > [[alternative HTML version deleted]] > > > > _______________________________________________ > > Bioconductor mailing list > > Bioconductor@stat.math.ethz.ch > > https://stat.ethz.ch/mailman/listinfo/bioconductor > > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > > -- > Martin Morgan > Computational Biology / Fred Hutchinson Cancer Research Center > 1100 Fairview Ave. N. > PO Box 19024 Seattle, WA 98109 > > Location: Arnold Building M1 B861 > Phone: (206) 667-2793 > [[alternative HTML version deleted]]
ADD COMMENT •
0
Entering edit mode
Hi Mark -- So the reproducible example is, I guess % cat > .Rprofile source("http://bioconductor.org/biocLite.R") biocLite("Biobase") ^D % R There were extensive changes to package build / installation during the last release. I'll forward this to R-devel, and look a little more my self. One work-around might be to add something along the lines of if (interactive()) { source('http://bioconductor.org/biocLite.R') biocLite('Biobase') } at least if you start from the command line; only the first invocation is interactive. Martin Mark Kimpel wrote: > Sorry took me a bit to get to this, was out of the office yesterday. > > The problem seems to only occur if I try to execute biocLite("Biobase") > from within my .Rprofile OR if I have tried and failed with this, > escaped, and then retry without rebooting R. If I completely leave it > out of my .Rprofile it will run normally from within R. This is > definitely new behavior as this has worked well for me for over a year. > It actually doesn't run every time, it is actually wrapped in a function > so that it only runs once a week (which I stripped out for diagnostic > purposes, that wrapper is not the problem). > > It seems like something internal to R or biocLite has changed, any idea > what it could be? > > Mark > ------------------------------------------------------------ > Mark W. Kimpel MD ** Neuroinformatics ** Dept. of Psychiatry > Indiana University School of Medicine > > 15032 Hunter Court, Westfield, IN 46074 > > (317) 490-5129 Work, & Mobile & VoiceMail > (317) 399-1219 Home > Skype: mkimpel > > "The real problem is not whether machines think but whether men do." -- > B. F. Skinner > ****************************************************************** > > > On Mon, May 18, 2009 at 10:48 PM, Martin Morgan <mtmorgan at="" fhcrc.org=""> <mailto:mtmorgan at="" fhcrc.org="">> wrote: > > Hi Mark -- > > Mark Kimpel <mwkimpel at="" gmail.com="" <mailto:mwkimpel="" at="" gmail.com="">> writes: > > > The code below results in a looping behavior with Biobase > downloaded over > > and over again until escaped, then each downloaded instance (all in > > different temp folders) is installed. This behavior began about > the time > > Weird! Does it help to start > > R --vanilla > > to avoid reading profile / etc information? What about unusual > environment variables / symbolic links in the file system? > > Martin > > > that R-2.9.0 was released, but I had been using R-devel prior to that > > without problem. My system is Debian Lenny AMD64. Output and > sessionInfo() > > follows below. > > > > source("http://www.bioconductor.org/biocLite.R") > > biocLite("Biobase") > > > >> source("http://www.bioconductor.org/biocLite.R") > > biocLite("Biobase") > > source("http://www.bioconductor.org/biocLite.R") > > Warning messages: > > 1: In safeSource() : Redefining ?biocinstall? > > 2: In safeSource() : Redefining ?biocinstallPkgGroups? > > 3: In safeSource() : Redefining ?biocinstallRepos? > >> biocLite("Biobase") > > Running biocinstall version 2.4.10 with R version 2.9.0 > > Your version of R requires version 2.4 of Bioconductor. > > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > argument 'lib' is missing: using > '/home/mkimpel/R_HOME/site-library-2.9.0' > > trying URL ' > > > http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2. 4.1.tar.gz' > > Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) > > opened URL > > ================================================== > > downloaded 1.9 Mb > > > > Loading required package: utils > > Running biocinstall version 2.4.10 with R version 2.9.0 > > Your version of R requires version 2.4 of Bioconductor. > > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > argument 'lib' is missing: using > '/home/mkimpel/R_HOME/site-library-2.9.0' > > trying URL ' > > > http://bioconductor.org/packages/2.4/bioc/src/contrib/Biobase_2. 4.1.tar.gz' > > Content type 'application/x-gzip' length 1973533 bytes (1.9 Mb) > > opened URL > > ================================================== > > ## REPEATS UNTIL ESCAPED > > ================================================== > > downloaded 1.9 Mb > > > > Loading required package: utils > > Running biocinstall version 2.4.10 with R version 2.9.0 > > Your version of R requires version 2.4 of Bioconductor. > > Warning in install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > argument 'lib' is missing: using > '/home/mkimpel/R_HOME/site-library-2.9.0' > > C-c C-c > > Execution halted > > > > The downloaded packages are in > > ?/tmp/RtmpkGuMs0/downloaded_packages? > > Warning message: > > In install.packages(pkgs = pkgs, repos = repos, dependencies = > > dependencies, : > > installation of package 'Biobase' had non-zero exit status > > * Installing *source* package ?Biobase? ... > > ** libs > > gcc -std=gnu99 -I/home/mkimpel/R_HOME/R > > > >> sessionInfo() > > R version 2.9.0 (2009-04-17) > > x86_64-unknown-linux-gnu > > > > locale: > > > LC_CTYPE=en_US.UTF-8;LC_NUMERIC=C;LC_TIME=en_US.UTF-8;LC_COLLATE =en_US.UTF-8;LC_MONETARY=C;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en_US.UTF- 8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_US.UTF-8;LC_ IDENTIFICATION=C > > > > attached base packages: > > [1] stats graphics grDevices datasets utils methods base > > > > loaded via a namespace (and not attached): > > [1] tools_2.9.0 > > ------------------------------------------------------------ > > Mark W. Kimpel MD ** Neuroinformatics ** Dept. of Psychiatry > > Indiana University School of Medicine > > > > 15032 Hunter Court, Westfield, IN 46074 > > > > (317) 490-5129 Work, & Mobile & VoiceMail > > (317) 399-1219 Home > > Skype: mkimpel > > > > "The real problem is not whether machines think but whether men > do." -- B. > > F. Skinner > > ****************************************************************** > > > > [[alternative HTML version deleted]] > > > > _______________________________________________ > > Bioconductor mailing list > > Bioconductor at stat.math.ethz.ch <mailto:bioconductor at="" stat.math.ethz.ch=""> > > https://stat.ethz.ch/mailman/listinfo/bioconductor > > Search the archives: > http://news.gmane.org/gmane.science.biology.informatics.conductor > > -- > Martin Morgan > Computational Biology / Fred Hutchinson Cancer Research Center > 1100 Fairview Ave. N. > PO Box 19024 Seattle, WA 98109 > > Location: Arnold Building M1 B861 > Phone: (206) 667-2793 > >
ADD REPLY •

Login before adding your answer.

Similar Posts
Loading Similar Posts
Traffic: 697 users visited in the last hour
Content Search
Users
Tags
Badges
Help About
FAQ
Access RSS
API
Stats

Use of this site constitutes acceptance of our User Agreement and Privacy Policy.

Powered by the version 2.3.6